View Single Post
Old 05-14-2019, 04:21 PM   #15
Ten Point
ballgame's Avatar
Join Date: Jan 2012
Location: Houston
Hunt In: Hill Country

Originally Posted by Big_gun View Post
weld nut on back of one of the clips and bolt it from the other side...thats one of the issues with skinning interior. It appears the tab from one side would be exposed to the adjacent tab, thus allowing a nut to be welded and skinned over or at least up to the tab.
I second the above, weld a nut on the back of one of the tabs.

*** a quick tip, thread a bolt through the nut when you weld the nut to the tab. That way if you get the nut too hot it wont mess up the thread. Once the nut cools remove the bolt. That or after you weld the nut on you can re-thread the nut. This will save you from some serious aggravation when assembling in the field. Don't ask me how I know!
ballgame is offline   Reply With Quote Back To The Top