Getting started on another set of ground blinds. Mostly the same as my previous blinds but I will assemble them at shop and then haul and set them. I have raised the threshold on my entry door, so I can bury them a little deeper in the ground. Last set, I made as modular panels and assembled them after I dug the hole. Hauling will be a bigger chore but assembly should work better. Will be building 8 and will post as progress is made.
Announcement
Collapse
No announcement yet.
A new set of hexagon ground blinds
Collapse
X
-
I'm using 3x5 foot sheets of Hardie backer board for walls. All my horizontals are 36inches with a 30degree cut on each end. 2x4 on bottom and 2x2 on top. Verticals are 2x4 studs cut 55 inches long but they have a 30 degree rip on each side, to tie the panels together with the proper angle. Everything is glued with liquid nails and staled with neumatic staples.
Comment
Comment