Announcement

Collapse
No announcement yet.

Need Tuning Help in or near BCS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need Tuning Help in or near BCS

    Hey guys, I got my Creed back from the bow shop with the new strings. It has always been very finicky about the way way I grip it. The only way I can get any sense of repeatability out of it is to hook the grip with my thumb and keep my palm and hand completly away from touching the grip during the shot. Well right now I can do everything the same and arrows are going everywhere. Like a 14"-16" spread at 30 yards. I am not the best archery shot but with my other bow I can always shoot 3"-5" at that range. I am super annoyed with it right now and frustrated. I am wondering if anyone near BCS or Waco has the time to try to help diagnose my issue. I don't know if it needs tuning or if it's just a result of poor form. Any thoughts or ideas are appreciated.

    #2
    more of a vertical spread or horizontal?

    I would think with vertical, I would lean towards cam timing

    horizontal would be a form issue

    also, be aware that new strings can cause poundage to go up ever so slightly, due to not being stretched. if you were on the tip of being underspined, you very well could be now.

    Comment


      #3
      I am shooting 400 spined arrows 55-70 and pulling about 67. Spread is everywhere. Not consistent engoough to say vertical or horizontal

      Comment


        #4
        Go to live oak archery in Bryan; they are a site sponsor as well, they will get you tuned up. Also get you some 300 spine arrows... my creed sprayed like that when I was underspined, even worse with broadheads at 65 lbs. Do you have the focus grip? I could never be consistent when I had it on my bow, best thing I ever did was rip that junk off and wrap the riser in tennis racket grip.

        Comment


          #5
          hmm.. sounds like youre getting some kind of deflection.. if you have any spray foot powder or dry erase marker, put it on your fletchings and see if youre getting any contact..

          and I would say youre underspined

          im just in the beginning stages of learning to tune, so just some ideas

          Comment


            #6
            Originally posted by kd350 View Post
            Go to live oak archery in Bryan; they are a site sponsor as well, they will get you tuned up. Also get you some 300 spine arrows... my creed sprayed like that when I was underspined, even worse with broadheads at 65 lbs. Do you have the focus grip? I could never be consistent when I had it on my bow, best thing I ever did was rip that junk off and wrap the riser in tennis racket grip.

            It has the focus grip and I'm not a big fan but I have the same grip on my other bow and it shoots just fine.

            Comment


              #7
              Originally posted by hully1029 View Post
              hmm.. sounds like youre getting some kind of deflection.. if you have any spray foot powder or dry erase marker, put it on your fletchings and see if youre getting any contact..

              and I would say youre underspined

              im just in the beginning stages of learning to tune, so just some ideas
              ^^^I owe this guy a cold beer^^^

              So yeah....I'm a Dumbarse! I read the thread and noticed a small piece of fuzz on the moleskin on the fork of my rest. Looked back at the arrows I have been slinging and there was the slightest clear streak on the vanes.

              So I pulled the moleskin off and wiped the fork down with fingernail polish remover. The pic below is my 60 yard group before adjusting the pin. Thanks Hully!



              Sent from my XT1650 using Tapatalk

              Comment


                #8
                Originally posted by Jon B View Post
                ^^^I owe this guy a cold beer^^^

                So yeah....I'm a Dumbarse! I read the thread and noticed a small piece of fuzz on the moleskin on the fork of my rest. Looked back at the arrows I have been slinging and there was the slightest clear streak on the vanes.

                So I pulled the moleskin off and wiped the fork down with fingernail polish remover. The pic below is my 60 yard group before adjusting the pin. Thanks Hully!



                Sent from my XT1650 using Tapatalk
                I've had my fair share of questions, as well. Glad you got it squared away!

                Sent from my SM-G955U using Tapatalk

                Comment


                  #9
                  Originally posted by Jon B View Post
                  It has the focus grip and I'm not a big fan but I have the same grip on my other bow and it shoots just fine.


                  I’ve heard it’s not as bad on other bows. But have heard, and experienced the creed being picky about hand placement


                  Sent from my iPhone using Tapatalk Pro

                  Comment


                    #10
                    unless you are shooting a 26" arrow you are shooting the wrong spine.

                    Comment

                    Working...
                    X