diy - led light install @ camper awning

[BCorn]

step 1 - this is the kit I ordered on amazon for about $30

[BCorn]

this is an led light kit that I ordered just for the end that will plug into the 1141 bulb socket for my porch light. this way the leds will be switched and this can all put put back to...and no drilling or altering my travel trailer.

[BCorn]

here is the porch light socket plug in one end and I wired on a dc barrel connecter on the other end. this is the end that will plug into and power the leds.

[Quackerbox]

this is an led light kit that I ordered just for the end that will plug into the 1141 bulb socket for my porch light. this way the leds will be switched and this can all put put back to...and no drilling or altering my travel trailer.

have a link for this? Wanting to do this for my parents since the factory left the ones they ordered out

[savin yours]

Nice, following.

[protech]

http://www.amazon.com/SUPERNIGHT%C2%AE-Waterproof-Flexible-strip-Changing/dp/B00ASHQQKI/ref=sr_1_2?&ie=UTF8&qid=1438799808&sr=8-2&keywords=supernight+led

http://www.amazon.com/dp/B00CCZ15Q4/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=YJVJJ0PJ0S5A&coliid=I2UI6RASHRRA7J

http://www.amazon.com/Generic-5-5x2-1mm-Alligator-Connector-Adapter/dp/B00P6G5C1K/ref=sr_1_1?ie=UTF8&qid=1438799868&sr=8-1&keywords=dc+barrel+connecter

Been wanting to do this also. this seems like the most logical way to accomplish it.

QB I think these are the items BCorn has, at least it looks like them.

[BCorn]

will take more pictures as I work on this.....probably finish up this weekend

[Razorback01]

Ready for the pics and have ours setup for October.

[Quackerbox]

http://www.amazon.com/SUPERNIGHT%C2%...supernight+led

http://www.amazon.com/dp/B00CCZ15Q4/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=YJVJJ0PJ0S5A&coliid=I2UI6RASHRRA7J

http://www.amazon.com/Generic-5-5x2-1mm-Alligator-Connector-Adapter/dp/B00P6G5C1K/ref=sr_1_1?ie=UTF8&qid=1438799868&sr=8-1&keywords=dc+barrel+connecter

Been wanting to do this also. this seems like the most logical way to accomplish it.

QB I think these are the items BCorn has, at least it looks like them.

Awesome, and I think that would work.

I found where the factory wire for the power awning comes out but pops was hinky about pulling the silicone out and replacing it. That bulb deal would eliminate the need and turn a 1.5 hour job to 20 minutes

[Stick-Launcher]

in for the results

[TexasCanesFan]

this is an led light kit that I ordered just for the end that will plug into the 1141 bulb socket for my porch light. this way the leds will be switched and this can all put put back to...and no drilling or altering my travel trailer.

PERFECT. I will be doing it this way for sure.

Ready for some progress pics.

[COACH_EM_UP]

I am looking to do this on my truck, under the bed, and on my boat as well.

[SB09]

I really like the idea to use the existing porch light socket.

[Dirtymike]

Pretty cool deal.

[BCorn]

Got a couple more steps done