Announcement

Collapse
No announcement yet.

New Slick Trick AXE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    New Slick Trick AXE

    So I found me a new ax.

    Seriously now, 3 different arrows are off to the right of my target. I've checked the BH tuning charts. I don't want to turn the weight down on my bow, so let me know if I read this right. I should add weight to my arrow because I am under spined??? Fairly new to bowhunting, so any help would be greatly appreciated.
    Attached Files

    #2
    If underspined, need to shoot less weight or lighter tip to stiffen spine.

    You could also shorten your arrow if you have room.

    There are a ton of other variables though.

    What does your paper tune lok like?

    Where do your B-heads hit from field points?

    Comment


      #3
      Originally posted by bowpro12 View Post
      If underspined, need to shoot less weight or lighter tip to stiffen spine.

      You could also shorten your arrow if you have room.

      There are a ton of other variables though.

      What does your paper tune lok like?

      Where do your B-heads hit from field points?
      Paper tuned a bullet hole. BHs are shooting way right from my FPs

      Comment


        #4
        Originally posted by RAGUIRREJR View Post
        Paper tuned a bullet hole. BHs are shooting way right from my FPs
        Have you made any adjustments to your rest or nock point?

        But if you are under spined, you gotta fix that first.

        Comment


          #5
          What bow?
          What DL?
          What poundage?
          What arrow and spine, and length?

          Comment


            #6
            Originally posted by DrenalinJunkie View Post
            Have you made any adjustments to your rest or nock point?

            But if you are under spined, you gotta fix that first.
            No adjustments made. I'm not sure if I'm underspined

            Comment


              #7
              Originally posted by rocky View Post
              What bow?
              What DL?
              What poundage?
              What arrow and spine, and length?
              Was just about to type the same thing? Will go a long ways in getting you the advice you seek.

              Comment


                #8
                Originally posted by rocky View Post
                What bow?
                What DL?
                What poundage?
                What arrow and spine, and length?
                PSE Revenge
                26.5"
                70#s
                shooting 350 CX Mayhem Hunters cut to about 27 I believe

                Comment


                  #9
                  Originally posted by RAGUIRREJR View Post
                  No adjustments made. I'm not sure if I'm underspined
                  Just re-read the OP............... thought you said the chart was saying you are under spined.

                  Comment


                    #10
                    Originally posted by DrenalinJunkie View Post
                    Just re-read the OP............... thought you said the chart was saying you are under spined.
                    I'm still new to bowhunting and shooting BHs. That is what I understood from the chart because I'm hitting to the right of my FPs

                    Comment


                      #11
                      Not underspined.
                      Simple tuning issue, but you for sure could cut arrows shorter.
                      I Tuned a bow the other day with these arrows, and without bashing, I found nock orientation to be critical.
                      In other words, at least with the arrows the customer brought in, spine was inconsistent, and rotating nock to different vanes was required, to get good paper-tears.
                      He chose to go with a different shaft of the same spine that didn't require this.

                      Comment


                        #12
                        Originally posted by rocky View Post
                        Not underspined.
                        Simple tuning issue, but you for sure could cut arrows shorter.
                        I Tuned a bow the other day with these arrows, and without bashing, I found nock orientation to be critical.
                        In other words, at least with the arrows the customer brought in, spine was inconsistent, and rotating nock to different vanes was required, to get good paper-tears.
                        He chose to go with a different shaft of the same spine that didn't require this.
                        So I just rotate nock to a different vane? And shorten my arrows a bit more? Will this also affect my FPs?

                        Comment


                          #13
                          Yes, but a rest movement may still be required.
                          If the Revenge, is a Hybrid cam,(I assume it is), make sure top cam is straight at full draw, and you are not torqueing the bow.
                          Most BH tuning issues, (if way bad), are shooter induced.

                          Comment


                            #14
                            Originally posted by rocky View Post
                            Yes, but a rest movement may still be required.
                            If the Revenge, is a Hybrid cam,(I assume it is), make sure top cam is straight at full draw, and you are not torqueing the bow.
                            Most BH tuning issues, (if way bad), are shooter induced.
                            Affects BH's way more than FPs? FPs are hitting target just fine

                            Comment


                              #15
                              i know this may sound crazy... but did u make sure your shooting same grain fp and bh?

                              Comment

                              Working...
                              X