Lo light remedy for fiber optic sights - TexasBowhunter.com Community Discussion Forums

Hydestik · 01-19-2016, 11:15 AM

Just wondering if anyone has had trouble with fiber optic sights during low light . The standard sight light doesn't work for fiber optic sights because they gather light on the ends of the fiber optic strands. I had a good bit of trouble seeing the sight pins in the evening in my pop up blind because the blind is all black inside . Any solutions out there ?

red · 01-19-2016, 11:21 AM

they gather light along the entire length of the fiber. several sights have light mounts that aim the light along the body of the fiber, not the end. the fiber may be cracked or broken if a light aimed in the middle is not making it to the tip of the fiber.

Hydestik · 01-19-2016, 11:24 AM

Okay I wasn't aware of that . The only light ive seen mounts on the body of the sight above the pins .

txdukklr · 01-19-2016, 01:21 PM

Quote:

Originally Posted by red

they gather light along the entire length of the fiber. several sights have light mounts that aim the light along the body of the fiber, not the end. the fiber may be cracked or broken if a light aimed in the middle is not making it to the tip of the fiber.

light anywhere along the fiber ought to brighten it up. I agree the fiber must be broken . . . . .my new sight stinks when it is dim, I have to use the light in order to get it bright inside of a blind.

XJessen89 · 01-19-2016, 03:41 PM

What about using a small glow stick? We used to do the night Frisbee golf tournaments and tape these little 1 1/2" glow sticks to the bottom of the discs. You could probably put one of those on the clear part of the sight with a piece of electrical tape on it so the light would only shine in on the fiber strands, and not light up your blind.

red · 01-19-2016, 05:41 PM

Quote:

Originally Posted by XJessen89

What about using a small glow stick? We used to do the night Frisbee golf tournaments and tape these little 1 1/2" glow sticks to the bottom of the discs. You could probably put one of those on the clear part of the sight with a piece of electrical tape on it so the light would only shine in on the fiber strands, and not light up your blind.

the original trophy ridge flatliner sight had a hole in the housing to insert a small glow stick. Didn't work worth a flip in my experience with them

Carpe_diem · 01-19-2016, 05:49 PM

Just a reminder that if you want your trophy to make the P&Y Book, lighted sights are no bueno:

The Rules of Fair Chase

The term “Fair Chase” shall not include the taking of animals under the following conditions:
.....
By the use of electronic devices for attracting, locating or pursuing game or guiding the hunter to such game, or by the use of a bow or arrow to which any electronic device is attached with the exception of lighted nocks and recording devices that cast no light towards the target and do not aid in rangefinding, sighting or shooting the bow.

https://pope-young.org/fairchase/

I use a crosshair sight on my compound, without a peep, so that I can shoot in the lowest light conditions.

old killer · 01-20-2016, 06:19 AM

There is always going to be a problem with seeing fibers when the target is brighter than the fiber. Even on 2D targets in the sun when the fibers are in the shade.
There are a lot of small lights that can be attached to the sight bar to light the fibers. Try to find one that you can adjust the brightness on. In low light the fibers can over power the target and make it difficult to aim.
You also don't want the light to be focused toward the target.

Hydestik · 01-20-2016, 11:23 AM

Quote:

Originally Posted by old killer

There is always going to be a problem with seeing fibers when the target is brighter than the fiber. Even on 2D targets in the sun when the fibers are in the shade.
There are a lot of small lights that can be attached to the sight bar to light the fibers. Try to find one that you can adjust the brightness on. In low light the fibers can over power the target and make it difficult to aim.
You also don't want the light to be focused toward the target.

I noticed that the pins are difficult to see when the sun is shining outside but relatively dark in the blind . I was thinking of building a make shift hood over my sight ring similar to rifle sun shade.

glpoe1 · 01-21-2016, 09:21 AM

I forget the brand but there is a light with several steps of brightness that works fairly well. The trouble I have had is even with the light the pins don't light up that well if it is sunny outside.

splitbeam145 · 01-21-2016, 10:59 AM

Quote:

Originally Posted by glpoe1

I forget the brand but there is a light with several steps of brightness that works fairly well. The trouble I have had is even with the light the pins don't light up that well if it is sunny outside.

Zbros makes an awesome light. They're out of Fredericksburg. Super good guys. Daniel Zintgraff is the owner. Look up zbrosarchery.com. It's adapts to
multiple sights and it has a usb cord for charging it up. I've had mine for 6 months using it for 3D and hunting. Still on my 1st charge.

DRT · 01-21-2016, 11:04 AM

Most newer sights have a hole the lights thread in and shine only on the wound up part of the fibers. Mine works great. Unless you forget to shut it off.

01-19-2016, 11:15 AM	#1
Hydestik Ten Point Join Date: Feb 2015 Hunt In: Hill Country	Lo light remedy for fiber optic sights Just wondering if anyone has had trouble with fiber optic sights during low light . The standard sight light doesn't work for fiber optic sights because they gather light on the ends of the fiber optic strands. I had a good bit of trouble seeing the sight pins in the evening in my pop up blind because the blind is all black inside . Any solutions out there ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-19-2016, 11:21 AM	#2
red Ten Point Join Date: Oct 2006 Location: Midlothian, TX Hunt In: Looking for a lease...	they gather light along the entire length of the fiber. several sights have light mounts that aim the light along the body of the fiber, not the end. the fiber may be cracked or broken if a light aimed in the middle is not making it to the tip of the fiber.

01-19-2016, 11:24 AM	#3
Hydestik Ten Point Join Date: Feb 2015 Hunt In: Hill Country	Okay I wasn't aware of that . The only light ive seen mounts on the body of the sight above the pins .

01-19-2016, 03:41 PM	#5
XJessen89 Nubbin' Buck Join Date: Jan 2016 Location: Wylie Hunt In: Varies	What about using a small glow stick? We used to do the night Frisbee golf tournaments and tape these little 1 1/2" glow sticks to the bottom of the discs. You could probably put one of those on the clear part of the sight with a piece of electrical tape on it so the light would only shine in on the fiber strands, and not light up your blind.

01-19-2016, 05:49 PM	#7
Carpe_diem Eight Point Join Date: Mar 2007 Location: Abilene, TX Hunt In: Taylor, Fisher, Jones Counties and TPW draw hunts	Just a reminder that if you want your trophy to make the P&Y Book, lighted sights are no bueno: The Rules of Fair Chase The term “Fair Chase” shall not include the taking of animals under the following conditions: ..... By the use of electronic devices for attracting, locating or pursuing game or guiding the hunter to such game, or by the use of a bow or arrow to which any electronic device is attached with the exception of lighted nocks and recording devices that cast no light towards the target and do not aid in rangefinding, sighting or shooting the bow. https://pope-young.org/fairchase/ I use a crosshair sight on my compound, without a peep, so that I can shoot in the lowest light conditions.

01-20-2016, 06:19 AM	#8
old killer Ten Point Join Date: Dec 2009 Location: Orange, Texas Hunt In: Texas, Oklahoma, Kansas, New Mexico	There is always going to be a problem with seeing fibers when the target is brighter than the fiber. Even on 2D targets in the sun when the fibers are in the shade. There are a lot of small lights that can be attached to the sight bar to light the fibers. Try to find one that you can adjust the brightness on. In low light the fibers can over power the target and make it difficult to aim. You also don't want the light to be focused toward the target.

01-21-2016, 09:21 AM	#10
glpoe1 Ten Point Join Date: Sep 2010 Location: Snyder, TX Hunt In: Scurry Co.	I forget the brand but there is a light with several steps of brightness that works fairly well. The trouble I have had is even with the light the pins don't light up that well if it is sunny outside.

01-21-2016, 11:04 AM	#12
DRT Pope & Young Join Date: Dec 2009 Location: Fort Worth, Tx Hunt In: Jones and San Saba Counties and Missouri	Most newer sights have a hole the lights thread in and shine only on the wound up part of the fibers. Mine works great. Unless you forget to shut it off.