Bow Blind Build input

[Quackerbox]

This is the way I’m wanting to go

I have a pdf of plans for an octagon. Its for a wood blind but gives dimensions

Sent from my SM-G930V using Tapatalk

[Abcdj]

Abcdj, is that a hay ring or is that something you fabricated yourself?

A guy in Paris has a fertilizer company. When its to wet to get out he makes 3 and 4 ring hay rings. They are usually about 4 foot tall and 8 ft round. He has a round jig that he bends the tubing in circles. I ask him to make me one with 6 foot uprights that were 12 inches apart for windows. (4). I made another one 30 inches as a door opening. So he made them how ever i drew them up. They cost $135 each.

Best thing about them is with the coroplast and windows it might weigh 80 pounds. If you want to move them you just turn it on its side and roll it around. I used joist hangers with 2x4s in an X shape to attach a plywood roof.

[Abcdj]

I have a pdf of plans for an octagon. Its for a wood blind but gives dimensions

Sent from my SM-G930V using Tapatalk

Pm me that file. Thats rewally nice!

[J Greer]

Pm me that file. Thats rewally nice!

I’m interested in this type of blind also, can you pm me the file


Sent from my iPhone using Tapatalk

[Quackerbox]

Pm me that file. Thats rewally nice!

I’m interested in this type of blind also, can you pm me the file


Sent from my iPhone using Tapatalk

No problem.

If you dont have it by lunch, remind me

Sent from my SM-G930V using Tapatalk

[BURTONboy]

I have a pdf of plans for an octagon. Its for a wood blind but gives dimensions

Sent from my SM-G930V using Tapatalk

I would like that file as well.

Sorry op, im no help to your question. I build all my blinds out of ripped 2x4’s and plywood and know nothing about that foam.


Sent from my iPhone using Tapatalk

[Quackerbox]

Pm me that file. Thats rewally nice!

I’m interested in this type of blind also, can you pm me the file


Sent from my iPhone using Tapatalk

I would like that file as well.

Sorry op, im no help to your question. I build all my blinds out of ripped 2x4’s and plywood and know nothing about that foam.


Sent from my iPhone using Tapatalk

wasn't able to PM it so lets try this. If it doesn't work send me a good email and I forward it. Also have one for a hexagon.

[Duckhead78]

wasn't able to PM it so lets try this. If it doesn't work send me a good email and I forward it. Also have one for a hexagon.

Could you post the plans for the Hexagon also?

[Quackerbox]

Could you post the plans for the Hexagon also?

Certainly. They're on a jump drive at my desk and i wont get back to them till tomorrow.

So far guys are saying the attachment above didnt work. If it did for you awesome ill add the other. If not send me an email and I'll go that route

Sent from my SM-G930V using Tapatalk

[Duckhead78]

Certainly. They're on a jump drive at my desk and i wont get back to them till tomorrow.

So far guys are saying the attachment above didnt work. If it did for you awesome ill add the other. If not send me an email and I'll go that route

Sent from my SM-G930V using Tapatalk

I certainly appreciate it.

[Quackerbox]

i certainly appreciate it.

[ATTACH]937736[/ATTACH]

[HeyMikey]

Following....

[SaltwaterSlick]

Square tubing frame, with welded wire covering, then greenhouse cloth and camo netting on the outside... These are 4X8 floor with offset 2 feet up that goes out another 18"... plenty of room for three grown-ups... very comfortable, quiet and easy to assemble. Been using this style for 20+ years...

[SaltwaterSlick]

Also used the same concept on a pit blind... dug a 4X6 foot hole and put a dome on top of it using same design... actually killed my best buck to date out of it at 18 yards with a recurve. Hole makes you about waist deep in the ground so standing and shooting, you shot trajectory is slightly an upward path... Been sort of interesting over the years to kill so many deer from that blind where the entry hole is lower than the exit hole... In the case of our buddy Chew, when he shot out of it, unless he was standing on a block, his shots were at a severe upward angle... (Love ya, little buddy! )







This is a 159 5/8" buck I shot from that blind. Pic is about 5 seconds before I let the arra go... (still frame from video).



He ran about 50 yards

[Duckhead78]

Very interesting blind builds. Ideas I've never thought about for sure. I'm trying to be as creative as possible on this build as the East Texas Whiteail (in my opinion) is the hardest to hunt and smartest of them all.