HELP - bullet casing in dash board.

[Sunnylab]

So I sighted in my AR this past wknd. My rest was the driver window/door frame and the spent casings ended up on my dashboard. I thought I got all of them out until this morning when I turned on my defrost. I immediately heard at least 2 casings fall down into the interior vent of the dash board.

I've already talked to the dealership and the quickest they can get me in is next week. In the meantime, any suggestions on how to get these out? I can hear them rolling around in there every time I take a turn left or right.

I'm in the Weatherford / West FT Worth area.

[adam_p]

Youtube how to take your dash apart and do it yourself.

I bet it is way easier than you think.

[Graysonhogs]

Bluetooth cam and some grabbers.

[tgil]

Flexible grabber thingy?

https://www.harborfreight.com/24-inch-2-in-1-pickup-tool-94162.html

[txhunter007]

Maybe try a tool magnet with a flexible shaft.

[Fishndude]

Maybe try a tool magnet with a flexible shaft.

Brass isn’t magnetic.

[Razorback01]

Well, he may have been shooting the cheap steel cased stuff.

[Bruiser]

HIt the ac button and open your floor vents

[Chrisfish78]

I would just take the dash off, just do not break the clips if you can help it. The dealership will charge you out the ***** for the labor. Not worth it.

[Wil Taylor]

Brass isn’t magnetic.

No but the primer is

[Killer]

I thought you had to have 2 or 3 fall down there to get it broke in good!!

[Charles]

Don't turn left or right...

[ofishil]

I would try something like this.

https://www.amazon.com/Endoscope-Waterproof-Semi-Rigid-Inspection-Borescope/dp/B07FQM3RSX/ref=sr_1_7?ie=UTF8&qid=1537905227&sr=8-7&keywords=ENDOSCOPE+WITH+HOOK

[meltingfeather]

weekend project... all weekend.

[txhunter007]

Brass isn’t magnetic.

I realize that. Primers and steel casings are though.