Better roof ideas ( more support ) for cattle panel blind?

[BigThicketBoy]

I want to be able to pile brush on top without poking thru the plastic.

Sent from my XT1585 using Tapatalk

[BonesandArrow]

Tyvek house wrap?

[BigThicketBoy]

Tyvek house wrap?

Was thinking more actual support. Not just bending PVC pipe in an arc.

Sent from my XT1585 using Tapatalk

[jsctx84]

Osb?

[44mAG]

Better roof ideas ( more support ) for cattle panel blind?

We always topped ours off with plywood. Drilled holes around the edges and tied on with bailing wire.


Sent from my iPhone using Tapatalk

[Bowhuntingobsession]

I built a couple of them. The first one I took one of my wife's 9' canvas umbrellas and made a roof out of it. The next one I used 4"x4" cattle panel and bowed it up about two feet then covered it with a canvas top. Both were waterproof and lasted 5-6 years before they started leaking. You could pile lots of brush on the panel one.

[BigThicketBoy]

I built a couple of them. The first one I took one of my wife's 9' canvas umbrellas and made a roof out of it. The next one I used 4"x4" cattle panel and bowed it up about two feet then covered it with a canvas top. Both were waterproof and lasted 5-6 years before they started leaking. You could pile lots of brush on the panel one.

I like the umbrella idea.

Sent from my XT1585 using Tapatalk

[Bowhuntingobsession]

It was an easy fix being that it was a heavy duty one. It had wood braces on it. She only allowed me one though ��

[bowtecmike]

Old satellite fiberglass dish. Do a search, there were several posted years ago. Works like a charm

Sent from my VS987 using Tapatalk

[BigThicketBoy]

Old satellite fiberglass dish. Do a search, there were several posted years ago. Works like a charm

Sent from my VS987 using Tapatalk

This are getting hard to find.


Sent from my XT1585 using Tapatalk

[Quackerbox]

In. My last one with pvc didn't last before caving in. I have a dish I'm thinking about using. I guess you'd have to set some posts?

Sent from my SM-G930V using Tapatalk

[Tmag]

Cut the end out of that tall water tank you got. It is rounded and would be perfect and lightweight.

[BigThicketBoy]

Cut the end out of that tall water tank you got. It is rounded and would be perfect and lightweight.

I passed that on to another TBHer a couple of years ago.
Maybe the tank Depot have some that are damaged, I'll have to check there.

Sent from my XT1585 using Tapatalk

[esp]

An old swimming pool liner.


Sent from my iPhone using Tapatalk

[boh347]

I put r-panel