Announcement

Collapse
No announcement yet.

Breathable wader seam repair

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Breathable wader seam repair

    What is the best glue or seam sealer to repair breathable waders?
    I’ve got a pair that is leaking on the front seam at my knees. I thought about getting some shoe goo and going over the seams on the inside and outside. Wondering if there is something better?

    #2
    Following

    Sent from my SM-N970U using Tapatalk

    Comment


      #3
      Breathable wader seam repair

      Put some aqua seal over the seam and then apply. Tenacious tape inside and out


      Sent from my iPhone using Tapatalk
      Last edited by canny; 01-30-2021, 12:48 PM.

      Comment


        #4
        Tenacious or tenacity tape?

        Comment


          #5
          Ok I got it now

          Comment


            #6
            I haven’t found anything that works good all it does is maybe slow it down I bought a pair of Simms you will cry when you pay for them but 8 yrs now and not one leak

            Comment


              #7
              Use Flex Seal. Use the spray can or brush it on the seam inside of your waders. It works!


              Sent from my iPhone using Tapatalk

              Comment


                #8
                I might try the clear Flex-Seal on the seams

                Comment


                  #9
                  Aqua seal is the best thing by far for breathable waders

                  Comment


                    #10
                    3m 5200

                    Comment


                      #11
                      E6000

                      Comment


                        #12
                        Aqua Seal is your friend in these moments.


                        Sent from my iPhone using Tapatalk

                        Comment


                          #13
                          I used the flex seal stuff and it worked for about two trips

                          Comment


                            #14
                            Whatever you go with, turn them inside out and seal the inside, as well as the outside. I’d do at least 2 coats on each side letting it dry in between.

                            I’ve never had much luck fixing leaks so this is how I plan to try it next time.

                            Comment


                              #15
                              Flex seal. Then build a boat with the leftover flex seal

                              Comment

                              Working...
                              X