I have always shot around a 375-400 grain arrow, but wanted to play around with a little heavier setup.
Mathews nocam HTR
70#
26" draw
26 1/2" CE maxima reds 350 spine
Here's what I can up with tonight
395gr 11.5% foc
473gr 18.25% foc
563gr 23.78% foc
All of these where built off the same 350 spine arrow and just adding insert and point weight. I also do not know nor care what the speed is, but also think at 26" with this bow a 563 gr arrow might be traveling at the speed of smell and my pin gap would be huge, and would it counter affect penetration being I don't shoot a long draw or high fps bow to begin with.
Any arrow guru spine doctors chime in and give me your wisdom, thanks
Sent from my iPhone using Tapatalk
Mathews nocam HTR
70#
26" draw
26 1/2" CE maxima reds 350 spine
Here's what I can up with tonight
395gr 11.5% foc
473gr 18.25% foc
563gr 23.78% foc
All of these where built off the same 350 spine arrow and just adding insert and point weight. I also do not know nor care what the speed is, but also think at 26" with this bow a 563 gr arrow might be traveling at the speed of smell and my pin gap would be huge, and would it counter affect penetration being I don't shoot a long draw or high fps bow to begin with.
Any arrow guru spine doctors chime in and give me your wisdom, thanks
Sent from my iPhone using Tapatalk
Comment