Just wondering if anyone has had trouble with fiber optic sights during low light . The standard sight light doesn't work for fiber optic sights because they gather light on the ends of the fiber optic strands. I had a good bit of trouble seeing the sight pins in the evening in my pop up blind because the blind is all black inside . Any solutions out there ?
X
-
Originally posted by red View Postthey gather light along the entire length of the fiber. several sights have light mounts that aim the light along the body of the fiber, not the end. the fiber may be cracked or broken if a light aimed in the middle is not making it to the tip of the fiber.
Comment
-
What about using a small glow stick? We used to do the night Frisbee golf tournaments and tape these little 1 1/2" glow sticks to the bottom of the discs. You could probably put one of those on the clear part of the sight with a piece of electrical tape on it so the light would only shine in on the fiber strands, and not light up your blind.
Comment
-
Originally posted by XJessen89 View PostWhat about using a small glow stick? We used to do the night Frisbee golf tournaments and tape these little 1 1/2" glow sticks to the bottom of the discs. You could probably put one of those on the clear part of the sight with a piece of electrical tape on it so the light would only shine in on the fiber strands, and not light up your blind.
Comment
-
Just a reminder that if you want your trophy to make the P&Y Book, lighted sights are no bueno:
The Rules of Fair Chase
The term “Fair Chase” shall not include the taking of animals under the following conditions:
.....
By the use of electronic devices for attracting, locating or pursuing game or guiding the hunter to such game, or by the use of a bow or arrow to which any electronic device is attached with the exception of lighted nocks and recording devices that cast no light towards the target and do not aid in rangefinding, sighting or shooting the bow.
I use a crosshair sight on my compound, without a peep, so that I can shoot in the lowest light conditions.
Comment
-
There is always going to be a problem with seeing fibers when the target is brighter than the fiber. Even on 2D targets in the sun when the fibers are in the shade.
There are a lot of small lights that can be attached to the sight bar to light the fibers. Try to find one that you can adjust the brightness on. In low light the fibers can over power the target and make it difficult to aim.
You also don't want the light to be focused toward the target.
Comment
-
Originally posted by old killer View PostThere is always going to be a problem with seeing fibers when the target is brighter than the fiber. Even on 2D targets in the sun when the fibers are in the shade.
There are a lot of small lights that can be attached to the sight bar to light the fibers. Try to find one that you can adjust the brightness on. In low light the fibers can over power the target and make it difficult to aim.
You also don't want the light to be focused toward the target.
Comment
-
Originally posted by glpoe1 View PostI forget the brand but there is a light with several steps of brightness that works fairly well. The trouble I have had is even with the light the pins don't light up that well if it is sunny outside.
multiple sights and it has a usb cord for charging it up. I've had mine for 6 months using it for 3D and hunting. Still on my 1st charge.
Comment
Comment