I hate to admit this since I am on the Carbon Express Pro Staff, but I want you to really like these arrows because I believe they are the best fat shaft out there, and certainly the lightest.
We have noticed with some, not all, the back end is a little offset from the factory. This will cause some fish-tailing or wobble if you put it on an arrow spinner. To square them up, trim a little (like 1/4" or less) off the nock end. Enoch had 3 out of a dozen that needed to be squared. Those 3 would be less than an inch out at 50 yards, so you might not notice it.
We have noticed with some, not all, the back end is a little offset from the factory. This will cause some fish-tailing or wobble if you put it on an arrow spinner. To square them up, trim a little (like 1/4" or less) off the nock end. Enoch had 3 out of a dozen that needed to be squared. Those 3 would be less than an inch out at 50 yards, so you might not notice it.
Comment