Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > D-I-Y Projects
 
Thread Tools Display Modes
Old 01-08-2018, 02:23 PM   #1
CoolArrow
Ten Point
 
CoolArrow's Avatar
 
Join Date: Mar 2008
Location: San Juan, TX
Hunt In: Starr county
Default Hoist and basket

This will be my off season project. I hunt alone 90% of the time. So I want to fab up a hoist and basket- one piece
.

This is what I have in mind. Im thinking of using the winch on jeep to do the lifting, maybe run cable over pulleys. Then I want to use a bar with hooks and piece of chains to place around deer or hogs and lift up onto basket. Will probably use 3/16, 2in sq tube
How tall should it be? Im thinking top tube should be as wide as the basket. Do yall got anything similar? Thanks


Sent from my iPhone using Tapatalk
CoolArrow is online now   Reply With Quote Back To The Top
Old 01-08-2018, 03:24 PM   #2
ballgame
Ten Point
 
ballgame's Avatar
 
Join Date: Jan 2012
Location: Houston
Hunt In: Hill Country
Default

I would look at doing this on the back of the jeep versus on the front, just seems more practical that way and less fab work needed, unless you already have a 2" receiver on the front.
ballgame is offline   Reply With Quote Back To The Top
Old 01-08-2018, 07:40 PM   #3
CoolArrow
Ten Point
 
CoolArrow's Avatar
 
Join Date: Mar 2008
Location: San Juan, TX
Hunt In: Starr county
Default

Quote:
Originally Posted by ballgame View Post
I would look at doing this on the back of the jeep versus on the front, just seems more practical that way and less fab work needed, unless you already have a 2" receiver on the front.
Yes I already have a 2 rec on the front of jeep that I put when I built my bumper. But is there an arm to pole ratio for lifting? Im thinking that if I have a 2ft arm span then the upright pole cant be 1ft.
Thanks
CoolArrow is online now   Reply With Quote Back To The Top
Old 01-08-2018, 08:25 PM   #4
brushtrooper
Ten Point
 
brushtrooper's Avatar
 
Join Date: Jan 2009
Location: Texas
Hunt In: South Texas
Default

For the pulleys check out this place.

https://www.blockdivision.com/home.php
brushtrooper is online now   Reply With Quote Back To The Top
Old 01-08-2018, 09:08 PM   #5
MadHatter
Ten Point
 
MadHatter's Avatar
 
Join Date: Feb 2014
Default

How much do you charge to draft up schematics ?
MadHatter is offline   Reply With Quote Back To The Top
Old 01-08-2018, 09:18 PM   #6
mchildress
Ten Point
 
mchildress's Avatar
 
Join Date: Apr 2008
Location: Sealy,Tx
Hunt In: Polk
Default

A friend of mine build one years ago that was vertical that went in the rec on the back of his Jeep. Had a boat winch he could crank them up by the horns and haul to camp. Could be used for skinning also.
mchildress is offline   Reply With Quote Back To The Top
Old 01-08-2018, 09:24 PM   #7
Drycreek3189
Pope & Young
 
Drycreek3189's Avatar
 
Join Date: Jun 2013
Location: Troup
Hunt In: Wyoming and Texas
Default

Your drawing sucks but I like your idea !

I've actually thought about a variation of that myself. I want the lift to come off the basket though. The one thing I'm concerned with is the leverage of picking up a load might put on the tubing that goes in the reciever.

Big hogs are hard for an old fart to load. Ain't no handles on them !
Drycreek3189 is offline   Reply With Quote Back To The Top
Old 01-08-2018, 10:38 PM   #8
Big pig
Ten Point
 
Join Date: Dec 2013
Location: Cypress, tx
Hunt In: Goliad and Leon Co.
Default

Good idea. But I suggest a rack on the front with a fold out ramp on the side.
As far as handles on hogs, use a very short rope with a handle to tie around the upper jaw to drag. With the hair.
Big pig is offline   Reply With Quote Back To The Top
Old 01-08-2018, 10:40 PM   #9
CoolArrow
Ten Point
 
CoolArrow's Avatar
 
Join Date: Mar 2008
Location: San Juan, TX
Hunt In: Starr county
Smile

Quote:
Originally Posted by MadHatter View Post
How much do you charge to draft up schematics ?
It depends on how detail you want it. Charge more for color. Oh and by appointment only, I'm very busy!
CoolArrow is online now   Reply With Quote Back To The Top
Old 01-08-2018, 10:49 PM   #10
TeamAmerica
Eight Point
 
TeamAmerica's Avatar
 
Join Date: Oct 2016
Location: Dallas
Hunt In: Corsicana (Navarro County)
Default

What would be the full added length from the bumper? Guessing 3 feet? It would work great on level roads but I would worry about clearance if you have any creek bottoms or big inclines.
TeamAmerica is offline   Reply With Quote Back To The Top
Old 01-20-2018, 03:19 PM   #11
CoolArrow
Ten Point
 
CoolArrow's Avatar
 
Join Date: Mar 2008
Location: San Juan, TX
Hunt In: Starr county
Default




Update. I built the basket. Put a receiver tube in front. Basket is 33x19x5. Receiver tube on back will be for the lift.


Sent from my iPhone using Tapatalk
CoolArrow is online now   Reply With Quote Back To The Top
Old 01-20-2018, 03:20 PM   #12
CoolArrow
Ten Point
 
CoolArrow's Avatar
 
Join Date: Mar 2008
Location: San Juan, TX
Hunt In: Starr county
Default



Welds look good I think.


Sent from my iPhone using Tapatalk
CoolArrow is online now   Reply With Quote Back To The Top
Old 01-20-2018, 03:38 PM   #13
CoolArrow
Ten Point
 
CoolArrow's Avatar
 
Join Date: Mar 2008
Location: San Juan, TX
Hunt In: Starr county
Default



Im thinking of going with a 4ft long vertical tube. What yall think? The horizontal top tube will be about 21 long just so it clears the front of basket


Sent from my iPhone using Tapatalk
CoolArrow is online now   Reply With Quote Back To The Top
Old 01-20-2018, 03:56 PM   #14
CoolArrow
Ten Point
 
CoolArrow's Avatar
 
Join Date: Mar 2008
Location: San Juan, TX
Hunt In: Starr county
Default




This is what Im thinking. Hows it look?


Sent from my iPhone using Tapatalk
CoolArrow is online now   Reply With Quote Back To The Top
Old 01-20-2018, 05:44 PM   #15
scott123456789
Ten Point
 
Join Date: Aug 2008
Location: Weatherford, TX
Hunt In: Lone Camp, TX
Default

If you are going to roll that setup build an extension piece so you can hang to clean. I had a similar setup and it got old bouncing around listening to the hoist bounce around the farm.
scott123456789 is online now   Reply With Quote Back To The Top
Old Yesterday, 09:21 AM   #16
CoolArrow
Ten Point
 
CoolArrow's Avatar
 
Join Date: Mar 2008
Location: San Juan, TX
Hunt In: Starr county
Default

Quote:
Originally Posted by scott123456789 View Post
If you are going to roll that setup build an extension piece so you can hang to clean. I had a similar setup and it got old bouncing around listening to the hoist bounce around the farm.
I will use it just to lift the animal on to the basket, then drive it to camp and drive up to cleaning rack. I suffer from real bad arthritis in back, knees,hands so I need something to help me load game. I'm usually at lease by myself.
CoolArrow is online now   Reply With Quote Back To The Top
Old Today, 02:52 PM   #17
SnJGuin
Eight Point
 
SnJGuin's Avatar
 
Join Date: Dec 2010
Location: Tomball
Hunt In: Harrison
Default

Heck, I thought you said this will be an off-season project. It looks done! What else you planning on doing or are you done for the year now that you have it completed?...lol That would have taken me about three years just draw the schematic.
SnJGuin is offline   Reply With Quote Back To The Top
Old Today, 03:03 PM   #18
EarleyBird
Ten Point
 
EarleyBird's Avatar
 
Join Date: Dec 2008
Location: Leon County
Hunt In: Home
Default

Quote:
Originally Posted by SnJGuin View Post
Heck, I thought you said this will be an off-season project. It looks done! What else you planning on doing or are you done for the year now that you have it completed?...lol That would have taken me about three years just draw the schematic.
Pretty sure the OP got a 2nd-grader to draw his up!
EarleyBird is offline   Reply With Quote Back To The Top
Old Today, 03:13 PM   #19
Shake N' Bake
Pope & Young
 
Shake N' Bake's Avatar
 
Join Date: Sep 2009
Location: Krum, Tx
Hunt In: Where ever im invited
Default

Following.

Sent from my LGMP260 using Tapatalk
Shake N' Bake is online now   Reply With Quote Back To The Top
Old Today, 06:35 PM   #20
Ohio Darin
Six Point
 
Ohio Darin's Avatar
 
Join Date: Feb 2009
Location: Cincinnati, Ohio
Hunt In: Ohio, Kentucky, Indiana
Default

Looking good. Would be concerned of the connection at the base of the post being your weak link but see you have an angle brace in there. Weld up the top all around and should be good without a brace up top. Youll get some flex thats about all. Keep us posted how it finishes.


Sent from my iPhone using Tapatalk
Ohio Darin is offline   Reply With Quote Back To The Top
Old Today, 08:21 PM   #21
SnJGuin
Eight Point
 
SnJGuin's Avatar
 
Join Date: Dec 2010
Location: Tomball
Hunt In: Harrison
Default

Quote:
Originally Posted by EarleyBird View Post
Pretty sure the OP got a 2nd-grader to draw his up!
Still better than what I can do. Stick figures are too hard to keep the line straight when you are sober

Sent from my SAMSUNG-SM-G920A using Tapatalk
SnJGuin is offline   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:09 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 1999-2012, TexasBowhunter.com