Announcement

Collapse
No announcement yet.

Metal building guy needed Tomball area.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Metal building guy needed Tomball area.

    We have a very cheap door on our shop at work. We need something with a little more security. Can literally just pry the frame away from door with flat head screwdriver. Also need a repair where a delivery truck backed into bay door. I will attach pictures.







    Sent from my iPhone using Tapatalk

    #2
    Davis overhead doors
    281-659-9072

    he's very good.

    Comment


      #3
      Originally posted by mbf View Post
      Davis overhead doors

      281-659-9072



      he's very good.


      Ok thank you. I’m looking for a fellow TBH’er if at all possible. I will give this guy a call if there isn’t a TBH’er around



      Sent from my iPhone using Tapatalk

      Comment


        #4
        Metal building guy needed Tomball area.

        You’ll need to replace the jamb, probably an 8”x3.5” C. Also, I work for mueller in Willis and can get you a dead bolt door and frame for that. We unfortunately don’t have any crews that do labor, however I can get you our recommended contractor list.

        Give me a shout tomorrow
        936-344-0020 ext 5808

        Sent from my iPhone using Tapatalk
        Last edited by marshhunter; 03-27-2018, 07:48 PM.

        Comment


          #5
          Replace OH door jam. The walk door could use a security plate mounted on the outside to prevent from getting to keeper. Also, put 8" C inside the throats of the walk door jam, and anchor to floor and Z girt above. If you need more than that, take angle from center of door jam down to base angle inside. A door jam kicker, if you will.

          Comment


            #6
            Originally posted by Ironman View Post
            Replace OH door jam. The walk door could use a security plate mounted on the outside to prevent from getting to keeper. Also, put 8" C inside the throats of the walk door jam, and anchor to floor and Z girt above. If you need more than that, take angle from center of door jam down to base angle inside. A door jam kicker, if you will.


            Can you do it?


            Sent from my iPhone using Tapatalk

            Comment


              #7
              Originally posted by FLASH_OUTDOORS View Post
              Can you do it?


              Sent from my iPhone using Tapatalk
              Of course I can. But I'm not going to.

              Comment


                #8
                Originally posted by Ironman View Post
                Of course I can. But I'm not going to.


                I just laughed out loud. Wife is yelling from other room “what’s so funny?!?!”


                Sent from my iPhone using Tapatalk

                Comment


                  #9
                  Originally posted by FLASH_OUTDOORS View Post
                  I just laughed out loud. Wife is yelling from other room “what’s so funny?!?!”


                  Sent from my iPhone using Tapatalk


                  I'm way up in North Tx. Just letting you know what can be done.

                  Comment


                    #10
                    Let me see if my guy is booked and for how long. I may be able to get it done for you. I live in the tomball area.


                    Sent from my iPhone using Tapatalk

                    Comment


                      #11
                      Originally posted by DapperDan View Post
                      Let me see if my guy is booked and for how long. I may be able to get it done for you. I live in the tomball area.


                      Sent from my iPhone using Tapatalk


                      Ok thanks.


                      Sent from my iPhone using Tapatalk

                      Comment

                      Working...
                      X