Announcement
Collapse
No announcement yet.
Chicken Hawk ~ Joey's Scooter
Collapse
X
-
Chicken Hawk ~ Joey's Scooter
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)Tags: None
-
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
-
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
I decided to stretch the swingarm 4". Original plan was to strut it, like the #53 bike above.
I didnt have a jig or the material to make on, so I used allthread in a couple of places to keep everything lined up where it should be and for my bike to be strait when I am finished. Accordin to my tape measure....it worked.
Tubing is metric, so I found the closest flavor available. I cut some round stock down and had it turned for a tight fit.
Professionally welded. I didnt want to take any chances with my dirt dobbin skillz.Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
Excuse my little shop.
Its a mess!Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
I then decided to cut a little more off the back end.
I got this bright idea that I was going to lower the shock mounting holes.
Stupid idea!
I have sincet grinded it all off and I am going to just hardtail it the almost right way.
Next winter.....I mite cut it all off and build a new hardtail frame for it.
Baby steps first.Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
Bobbers usually dont have front fenders. I am going to use the front fender on the rear. Not sure how I am going to mount it yet. I have a few ideas. Fender will have holes drilled down the sides.
Old flat trackers used to take the front fender brackets and use them for fork support. I drilled some holes in mine and have it on for now. Not sure if my new front tire will fit in it.
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
What in the World is a redneck gonna do with a gate hinge on a motorsickle?
Seat pan that I made out of some 12 ga plate. Im gonna put some 1" paddin on it and have it covered in leather.
Seat will mount to the hinge as a pivot point. I will mount it after my 4" beehive springs get here.
Gonna use brass hardware where I can and its safe to do so.
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
Comment