![]() |
![]() |
![]() |
![]() |
![]() |
#1 |
Four Point
Join Date: Apr 2016
Location: Sugarland
Hunt In: Live Oak County
|
![]()
When constructing the feeders using a Tpost and the fencing material for the cottonseed feeders what kind of fencing material are you using? anything you can get at Home Depot or Lowes?
|
![]() |
![]() ![]() |
![]() |
#2 | |
Pope & Young
![]() Join Date: Aug 2008
|
![]() Quote:
i called tedesky fence co 817-599-3400 and paid them and they were nice enough to have me go pick a roll up at keystone steel & wire in sherman tx 903-893-0191 maybe they could set you up with a closer distributer |
|
![]() |
![]() ![]() |
![]() |
#3 |
Pope & Young
![]() Join Date: Oct 2006
Location: Georgetown, Texas
Hunt In: Ranch Owner, Lampasas County
|
![]()
just get some 2x4 square hole wire or vmesh wire from tractor supply. both work. make the basket about 2.5 foot or bigger across
|
![]() |
![]() ![]() |
![]() |
#4 |
Pope & Young
Join Date: Dec 2007
Location: Leander
Hunt In: San Saba
|
![]()
I'm trying to find a better way to feed cotton seed. Deer eat it at natural head height and too much falls on the ground that they stomp into the dirt.
|
![]() |
![]() ![]() |
![]() |
#5 |
Pope & Young
![]() Join Date: Oct 2006
Location: Deer Park, Texas
Hunt In: Fort McKavett, Texas
|
![]()
We use the "V" fencing but it is expensive.....You can use ranch fencing, make the hoops about 3 feet in diameter...
|
![]() |
![]() ![]() |
![]() |
#6 |
Four Point
Join Date: Aug 2017
|
![]()
Some guys are using frames from chemical totes & the openings are probably 4X4 5X5 inch squares.
|
![]() |
![]() ![]() |
![]() |
#7 |
Pope & Young
![]() Join Date: Apr 2014
Hunt In: Votaw, Hardin/Polk Co., TX. Bon Weir, Newton Co., El Dorado, Schleicher Co., TX.
|
![]()
I used 2x4 welded wire from tractor supply. They work great
|
![]() |
![]() ![]() |
![]() |
#8 |
Pope & Young
![]() Join Date: Apr 2014
Hunt In: Votaw, Hardin/Polk Co., TX. Bon Weir, Newton Co., El Dorado, Schleicher Co., TX.
|
![]() ![]() Sent from my iPhone using Tapatalk |
![]() |
![]() ![]() |
![]() |
#9 |
Ten Point
![]() Join Date: Oct 2006
Location: Arlington.Tx
Hunt In: Stonewall County
|
![]()
We use V wire cut into 9 ft lengths then formed into a cylinder. Makes a cylinder about 36 inches across by 5 ft tall. Holds around 800lbs
![]() Last edited by huntingfanatic; 01-29-2018 at 03:57 PM. |
![]() |
![]() ![]() |
![]() |
#10 |
Pope & Young
![]() Join Date: Aug 2010
Location: San Angelo, Tx
Hunt In: Mexico, Tom Green Co.
|
![]()
2x4 welded works as good as anything and is a lot cheaper than V
|
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|