Has anyone changed their old aluminum windows to vinyl in a brick home? I have been thinking about giving it a try. The labor for someone to do it seems very expensive
Announcement
Collapse
No announcement yet.
DIY Home Window replacement
Collapse
X
-
Originally posted by Ynotdrum View PostIt's simple just have to cut the nail flange off the old window (so as not damage any brick). The tricky part is the flashing of the new Windows. Backer rod/flashing and caulk are your friends.Originally posted by Antlers86 View PostVery simple. Watch a few YouTube vids and you will save a lot of money!
I have not been able to find a good youtube video, I need to look a little harder.
I know if I could find a good video I can do it. thanks for the comments
Comment
-
I am in Longview. If you need a tool, or run into something you can't figure out, shoot me a PM, and we'll get you fixed up.
I also know a guy, who is a pro, and works for one of the big window guys here in Longview. He loves sidework, and he's half as cheap as a contractor if you decide to go that route. He's done a few dozen for me, and it's always good work.
Comment
-
Just like the previous comment. Don't skip the sealing part.
1. There is a spray foam for windows (NOT GREAT STUFF), spray this in the wall cavity after window removal and just prior to installing the new window.
2. New windows can have tabs on all sides to help hold it in place. Seems like most of the new windows and the window holes are slightly different sizes. So, you may need to cut a few of the fins off. I ended up cutting off 3 fins per window. I left the top on, and drove a screw at the bottom exterior(hidden best I could, but still touching the window frame) to act as a fin. You could also put one on the opposite side.
3. After installation, it's caulk time. Caulk the outside and inside. If you can't professionally caulk like me, then use blue tape to help. Use the take to make like a railroad track around the caulk line, apply the caulk pretty thick. Next without waiting, it's time to remove the excess caulk. To smooth the caulk, get a bottle of dish washing soap, and put a few drops on your finger and smooth out the caulk line. Wipe the excess caulk in a paper bag, then pull off the blue tape. You are now a pro.
4. Start this process on a window that no one can see from the outside. You will get better as you progress. Caulk the inside last. You need to have mastered the caulk first.
Comment
Comment