Uh.. This isn't right.

[TacticalCowboy]

Strung my bow earlier and noticed this. I'm not sure when it happened. I shot a bit tonight and it didn't get any worse. This is a Bob Lee 62# Signatore recurve, and the crack is on the front of the bottom limb and seems to be only glass-deep. Should I be concerned?

[bubinga]

Send that pick to Rob, they are awesome to deal with.

[TacticalCowboy]

Send that pick to Rob, they are awesome to deal with.

Only problem is I'm not the original owner.

[stykshooter]

Few of my bows have that stress crack too but an easy fix.

Clean the groves out & just drop some super glue in & good to go

[Bisch]

I have read that those cracks can be caused by over tightening the limb bolts. You only need the bolts snug, plus another 1/8 to 1/4 turn. Like said above, send the pics to Rob and see what they say.

Bisch

[TacticalCowboy]

They aren't over tightened. I'll call in the morning.

[LeanMachine]

I'll second sending picks to Rob. If they aren't willing to do anything about it, I'll also second filling the cracks with super glue. Then just keep an eye on it.

[Saltgrass Mikerr]

super glue is your friend.

[TacticalCowboy]

Called today and talked to JJ. Apparently the bow is nearly 10 years old. He said to do the super glue thing, which I did. Hopefully it doesn't get worse.

[stykshooter]

Super glue should do the trick, glue also keeps water & moisture from getting in between glass & wood cores. If moisture or water does get in it'll turn white & bubble up