Beverage Holder-Need Ideas - TexasBowhunter.com Community Discussion Forums

SAC · 05-01-2012, 04:45 PM

I want to make some fairly simple beverage holders for a washer tournament. Would need to hold 4 cans. I want something I can set between 2 pits and 4 people use them. One on each end. Material type don't matter. Let me see what you got.

TIA
SAC

Bhuntinfishn · 05-01-2012, 05:04 PM

DEFINITLEY watching and want some too!!

Birddogss · 05-01-2012, 05:15 PM

Found this with a quick google search for "backyard beer holder" looks easy enough.....

Birddogss · 05-01-2012, 05:18 PM

Check out backyardbarkeep.com

bwssr · 05-01-2012, 05:44 PM

do a tall stake..put a coiled can holder(or 4) at the top, like the tekki torches...must fit with a coozie...

Stan R · 05-01-2012, 05:54 PM

this could be made with 4 cups holder very easy..

Stoof · 05-01-2012, 06:26 PM

Couple of 2x6's and a hole saw and your in business.
Drill four holes. Screw on a bottom with some 1x6. Build a base and stain.

Strain · 05-01-2012, 08:07 PM

Quote:

Originally Posted by Stan R

this could be made with 4 cups holder very easy..

I like this

Joey~AP · 05-01-2012, 09:27 PM

You'd have to ask D~Mo.

btreybig · 05-02-2012, 08:05 PM

If you can get your hands on some instrument tubing you could be in business. Easy to bend and light weight. Not sure if could get a small bulk but try Swagelok or if you know of anyone that works in a plant/refinery, I'm sure they have a good supply. Especially if they are in a turn around.

PBFrijoles · 05-02-2012, 08:41 PM

Quote:

Originally Posted by Stan R

this could be made with 4 cups holder very easy..

Use rebar, horseshoes,and plate stock if you have access to a welder. Imagination is where it's at.

Gummi Bear · 05-02-2012, 09:02 PM

Enchilada sauce comes in a can that is the right diameter for a cold drink sleeved in a neoprene koozie.

The depth is just right too.

I know a few folks that use them on their quad (4 wheeler, scooter, etc.) as drink holders.

I don't see why you couldn't fasten a few of them to a PVC pipe stand or something for a cheap solution. A little rattle can paint and it can look pretty official.

Walk up and down the canned goods aisle at the grocery store and I'm sure you can find something on the cheap.

05-01-2012, 04:45 PM	#1
SAC Ten Point Join Date: Feb 2009 Location: Weimar,TX Hunt In: Lavaca, Fayette & Colorado Co.	Beverage Holder-Need Ideas I want to make some fairly simple beverage holders for a washer tournament. Would need to hold 4 cans. I want something I can set between 2 pits and 4 people use them. One on each end. Material type don't matter. Let me see what you got. TIA SAC

05-01-2012, 05:15 PM	#3
Birddogss Pope & Young Join Date: Oct 2008 Location: Penn Valley, CA Hunt In: CA, TX, Diamond C	Found this with a quick google search for "backyard beer holder" looks easy enough..... Attached Images

05-01-2012, 09:27 PM	#9
Joey~AP Administrator Join Date: Oct 2006 Location: Right behind you...watchin. Hunt In: Texas	*You'd have to ask D~Mo.* __________________ *To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.* We're paratroopers, Lieutenant. *We're supposed to be surrounded......* /l _ ,[____], l---- L-- -OlllllllO- ()_)--()_)---o-)_)**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-01-2012, 05:04 PM	#2
Bhuntinfishn Ten Point Join Date: Nov 2010 Location: Leander,Texas Hunt In: Mills County, Priddy Texas	DEFINITLEY watching and want some too!!

05-01-2012, 05:18 PM	#4
Birddogss Pope & Young Join Date: Oct 2008 Location: Penn Valley, CA Hunt In: CA, TX, Diamond C	Check out backyardbarkeep.com

05-01-2012, 05:44 PM	#5
bwssr Pope & Young Join Date: Oct 2006 Location: Houston, Texas Hunt In: Madison county	do a tall stake..put a coiled can holder(or 4) at the top, like the tekki torches...must fit with a coozie...

05-01-2012, 05:54 PM	#6
Stan R Pope & Young Join Date: Apr 2008 Location: 77077 Hunt In: Madison and Colorado County	this could be made with 4 cups holder very easy..

05-01-2012, 06:26 PM	#7
Stoof Ten Point Join Date: Jan 2011 Location: Souther Austin Hunt In: Fayette Co./Blanco Co.	Couple of 2x6's and a hole saw and your in business. Drill four holes. Screw on a bottom with some 1x6. Build a base and stain.

05-02-2012, 08:05 PM	#10
btreybig Eight Point Join Date: Aug 2009 Location: Katy Hunt In: Webb & Victoria Co.	If you can get your hands on some instrument tubing you could be in business. Easy to bend and light weight. Not sure if could get a small bulk but try Swagelok or if you know of anyone that works in a plant/refinery, I'm sure they have a good supply. Especially if they are in a turn around.

05-02-2012, 09:02 PM	#12
Gummi Bear Ten Point Join Date: Jun 2010 Location: Arlington Hunt In: Comanche & Eastland	Enchilada sauce comes in a can that is the right diameter for a cold drink sleeved in a neoprene koozie. The depth is just right too. I know a few folks that use them on their quad (4 wheeler, scooter, etc.) as drink holders. I don't see why you couldn't fasten a few of them to a PVC pipe stand or something for a cheap solution. A little rattle can paint and it can look pretty official. Walk up and down the canned goods aisle at the grocery store and I'm sure you can find something on the cheap.