I wired the switch for mine "permanently" to the dash. My dad said "what if I want to use it on my truck?" I said "Reckon you better get you some wire and a switch!" I think it was 25 bucks from All Seasons.
Announcement
Collapse
No announcement yet.
Wiring a road feeder- Question
Collapse
X
-
I used a 50' cheap orange extension cord from WM, wired inline with a on/off switch and a 12V aux. plug or better known as a cigarette lighter plug . Anyways, I switch the road feeder out on my crewcab, SUV, Jeep, ATV, Tractor, just coil the excess wire up. We often make a feed pass in the shooting lanes at night/early AM. I do not like using lights/turn signals when feeding in the dark. Very few nights do I need the vehicle lights.
Comment
-
I have had several hooked into the horn wiring witch worked awesome because your never fumble if around in the dark looking for the switch but on my Polaris there is no horn so I had to use the remote that came with the feeder. However next year I’m planning on wiring in one of those big foot trolling motor switches to the floor.
Like this one
Comment
-
Originally posted by bowhntrmatt View PostMy hunting truck is only that, so I just cut the wires off the horn, wired them to the feeder. Works like a charm!
Comment
-
Here’s another option. It takes a lil more “want to”.
There’s a pin in the 7 pin trailer connector that can be made to have 12volts constantly. I had to add a fuse under the hood for mine to become hot. Buy a male 7-pin trailer plug and wire in a wireless remote operated switch on that hot pin. I use “The Remote”. Mount receiver unit of switch on road feeder. Keep wireless push button remote in center console of truck. Attach the feeder motor to remote operated switch as described in instructions.
Comment
-
Originally posted by brushtrooper View PostI used a 50' cheap orange extension cord from WM, wired inline with a on/off switch and a 12V aux. plug or better known as a cigarette lighter plug . Anyways, I switch the road feeder out on my crewcab, SUV, Jeep, ATV, Tractor, just coil the excess wire up. We often make a feed pass in the shooting lanes at night/early AM. I do not like using lights/turn signals when feeding in the dark. Very few nights do I need the vehicle lights.
Comment
Comment