That's a good start
Announcement
Collapse
No announcement yet.
Backyard shed metal or wood
Collapse
X
-
I got all of the trusses built today. I made a truss jig as found in the plans. I cut the trusses all to the same angle. When I stood them up side by side it didn't look pretty. Plans say to stagger and use the tallest in the center and the shortest on the sides. I had maybe 1/2" of variance in the height. I also framed the gable ends. I now have to frame in the door later in the week because I ran out of wood tonight. I put the siding on the rear gable. I was within 1/8" of square and the siding still didn't go on perfect. There must be a trick to lining it up but I didn't figure it out. Good thing this is the back side. I cut all of the studs and cut my plates for both of the side walls. I had to wrap it up tonight. I hope to have a few hours Wednesday evening to work on the door.
Sent from my iPhone using Tapatalk ProLast edited by thegrouse; 04-22-2018, 07:09 PM.
Comment
-
Got a chance to do a little tonight. I finished the gable end wall that has the door. It is complete and trimmed out, I will just need to cut out the door once I stand the walls. I began work on the sidewalls tonight. I got one side framed and sheeted but not completely nailed. I ran out of time. I should be able to devote 2-3 hours to the project Saturday morning and hopefully get a decent work day in Sunday.
Sent from my iPhone using Tapatalk ProLast edited by thegrouse; 04-26-2018, 07:23 PM.
Comment
Comment