TexasBowhunter.com Community  Discussion Forums

TexasBowhunter.com Community Discussion Forums (https://discussions.texasbowhunter.com/forums/index.php)
-   Equipment and Tuning (https://discussions.texasbowhunter.com/forums/forumdisplay.php?f=46)
-   -   QAU and Hoyt Risers (https://discussions.texasbowhunter.com/forums/showthread.php?t=688968)

canny 04-11-2018 12:13 PM

QAU and Hoyt Risers
 
Mounted my QAD LD on my Hoyt defiant and I have to put the rest up against the riser to allow an Allen wrench to clear the kickback part of the riser. Doing this extends the set screw in front of the riser so only the rest bolt is securing the rest. Would this cause problems? The rest feels solid

Sent from my SM-T700 using Tapatalk

muddyfuzzy 04-11-2018 02:34 PM

I have a similar issue with the QAD on my e35 since it isn’t the “elite” model. I have had no issues with the set screw not being engaged over several season of shooting the bow.


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 02:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1999-2012, TexasBowhunter.com