About to try to reflecth my arrow and was wondering what the best jig and glue are. Will be two inch blazers and I am shooting GT pro hunters. And tips would be appreciated
-
-
I use Blitzenburger and Gold Tip glue. Both work really well for me. -
Have used a Jo-Jan for years without a problem. Fletch-tite platinum has always worked for me but a lot of folks don't like the wait time. Be careful using a fast setting glue. And, prep the arrows. I like to clean all surfaces with acetone...just wipe it to clean it and use a q-tip with acetone to wipe away excess glue. Cheers!
FredComment
-
What if I wanna wrap em, do I do that first then glue on top?Comment
-
I cheat and use Quickfletch if I am not doing feathers.
Comment
-
Arizona ez mini fletch. Best thing out there for blazers. Lets you install them all at once with a 3 degree helicalComment
-
-
Ez fletch miniComment
-
Yes wrap first if you want wraps then glue on top of wrap. I use Bitzenburger and EEA fast set.Comment
-
Use the Arizona ez fletch mini. Most helical I have seen for the little vanes. Make sure arrow shaft is clean. I use acetone or alcohol and a scotch brite pad. Then apply wrap. I use a dry scotch brite to rough the wrap a touch. Then I use fletch tite platinum and blazers. Usually clean blazer base with alcohol as well. Seems like a lot but it's quick. I had some adhesion issues in the past that drove me nuts. This system is working well for me.Comment
-
I use super glue gel, no more fletching falling off for me!Comment
-
-
Thanks everyone, always good advice on hereComment
-
I have used the super glue gel on same arrows and same blazers with good success. I use a bitz jig.Comment
-
I use Blitzenburger and super glue gel too. Here is my latest on Black Eagle arrows.
Comment
Comment