Wanted to share a few of my latest projects related to bowhunting. My wheels are always turning and I'm always coming up with ideas for something to build. Hope you enjoy
Announcement
Collapse
No announcement yet.
Turbowhunter Solutions
Collapse
X
-
Trail Camera Mount
This is a camera mount I made that stays attached to the camera. With a cordless drill you can drill 2 holes in any existing T-post (fenceline or feed pen) or new t-post and mount it. It is very sturdy and can be locked using a cable lock. Can be easily moved from one post to the next spot.
Comment
-
Bow Sling
This is a simple bow sling I made because I don't like the ones you buy that go behind the stabilizer. On my bow it just seemed to be mounted too low from the grip and awkward. I think this is a little cleaner and you can make it exactly the size you need with no extra cord hanging around.
Comment
-
Pit Blind
This is a pit blind I made out of an old water storage tank. I made the windows a bi-fold system where you could leave one side or the other open or both if you want a bigger window for filming. Also, the shoot through netting is set up like curtains and can be adjusted to wherever you need it or don't.
Comment
-
Feed Pen Gate
This is a feed pen gate that I built so I can shoot into my feed pen without worrying about hitting something. It hinges on both sides at the bottom and easily folds up and down with less noise and movement than a regular type gate. It can be opened or closed quickly just by pulling two pins. Also, with it attached at the bottom on both ends, the hogs are less likely to root it up and get under it.
Comment
Comment