Items used were an old climber that I will probably not use as a climber again, 6"x6" steel plate, econo seat post, eze swivel and a boat seat.
I welded the plate to the cross rails on the under side after drilling bolt holes.
All that was left was to bolt everything up and put a new paint job on it.
I need to tear the tags from under the seat
note the spike that the cable is resting on. I also wired the side to the tree to keep it from shifting
As you can tell from this pic, it makes an excellent gun stand
I welded the plate to the cross rails on the under side after drilling bolt holes.
All that was left was to bolt everything up and put a new paint job on it.
I need to tear the tags from under the seat
note the spike that the cable is resting on. I also wired the side to the tree to keep it from shifting
As you can tell from this pic, it makes an excellent gun stand
Comment