Bergara b-14 HMR Group

[crimson-talon]

Factory hornady match 140 he and I am not a great shooter. I can’t figure out how to get the sub moa app to work but this is a 6 shot grouping from the other day


Sent from my iPhone using Tapatalk

[txoutdoorsman24]

That will kill for sure. The B14 is the hot new rifle. Hard to find them I the shelf anywhere

[bearintex]

Sub MOA works pretty good once you figure it out.

For a simple group size:

Open the app.
Select "Choose Target Picture"
Tap the gear button (lower left) and input at a minimum range to target and bullet diameter. Other info is extraneous.
Zoom in on the picture to fill as much of the screen as possible.
You have to have something on the target of a known size.
Center the green crosshair on one side of the known size object (KSO).
Tap the button on the top row, right side (Pencil and ruler), that should overlay a red X.
Now center the green crosshair on the exact opposite side of KSO, and tap the same pencil/ ruler button.
A dialog box will pop up, prompting you to input the size in inches of KSO.

Center the green crosshair on a bullet hole.
Tap the bullet hole button (top left on the bottom set of buttons). If you miss your mark, you can remove that hole with the next button to the right.
Repeat until you have marked all your bullet holes.
Tap the Post-it note button and all the calculations will be made and a yellow box containing the group data will be overlaid just to the right of wherever the green crosshair is. Tap the plus/ minus buttons in the upper right to increase or decrease the size of that box.
Then I just screenshot the image.

[crimson-talon]

Sub MOA works pretty good once you figure it out.

For a simple group size:

Open the app.
Select "Choose Target Picture"
Tap the gear button (lower left) and input at a minimum range to target and bullet diameter. Other info is extraneous.
Zoom in on the picture to fill as much of the screen as possible.
You have to have something on the target of a known size.
Center the green crosshair on one side of the known size object (KSO).
Tap the button on the top row, right side (Pencil and ruler), that should overlay a red X.
Now center the green crosshair on the exact opposite side of KSO, and tap the same pencil/ ruler button.
A dialog box will pop up, prompting you to input the size in inches of KSO.

Center the green crosshair on a bullet hole.
Tap the bullet hole button (top left on the bottom set of buttons). If you miss your mark, you can remove that hole with the next button to the right.
Repeat until you have marked all your bullet holes.
Tap the Post-it note button and all the calculations will be made and a yellow box containing the group data will be overlaid just to the right of wherever the green crosshair is. Tap the plus/ minus buttons in the upper right to increase or decrease the size of that box.
Then I just screenshot the image.

Awesome I’ll give it another whirl soon! Thank you sir


Sent from my iPhone using Tapatalk

[BLACKFINTURKEY]

Nice shooting. That looks like lone star handguns range.

[crimson-talon]

Nice shooting. That looks like lone star handguns range.

Quit stalking me! [emoji23][emoji23]


Sent from my iPhone using Tapatalk

[BLACKFINTURKEY]

Quit stalking me! [emoji23][emoji23]


Sent from my iPhone using Tapatalk

Lol it’s about 5 minutes from my house.

[crimson-talon]

It used to be 1 min from where I worked!


Sent from my iPhone using Tapatalk

[BLACKFINTURKEY]

It used to be 1 min from where I worked!


Sent from my iPhone using Tapatalk

Where did you work?

[crimson-talon]

Where did you work?

Calfrac


Sent from my iPhone using Tapatalk