Sourcing 2X4 Opening Wire Fence Panels

[cricman]

So, I am about to finish up some stand and fill feeders, and need to get the material to make the varmint cage. Where do y'all get your 2X4 opening wire panels (aka horse panels) from? I am in the DFW Area. Thanks in advance.


cricman

[hunting270]

Tractor Supply.

[dosshunter]

Beware. Squirrels can get through the 2X4 panel

[hunter68]

I usually find some at the savage yard. As mentioned, if you have squirrels you need smaller panels.

[cricman]

Thanks y'all.

Tractor Supply.

The horse panel they have, at least online, has a plastic or paint coating. I am looking for plain galvanized wire. I will try to check out the nearest store and see what they have in stock.

Beware. Squirrels can get through the 2X4 panel

Squirrels not a problem. Worried about slightly larger critters, since the motor is much closer to the ground.

I usually find some at the savage yard. As mentioned, if you have squirrels you need smaller panels.

At which salvage yard near DFW do you usually find it? I'm trying to avoid driving all over the metro-mess to track down welded wire fencing. Ultimately, I am going to make three stand and fill feeders, so a full panel will likely get the job done.

Thanks again,


cricman

[Mfer16]

i got mine at tractor supply also.

[hunt247]

Bradberry's Best in Dublin

[cricman]

Bradberry's Best in Dublin

Unfortunately, that's a 2 hour drive. I'm gonna hit the closest Tractor Supply and see what they have.


cricman

[hunter68]

Cricman, I am in Lubbock. Maybe someone will chime in.

[JMR]

Granbury Arrow Feed will have it. Not sure exactly where you are.

[Bisch]

Beware. Squirrels can get through the 2X4 panel

I'd bet some coons can too!

Bisch

[cricman]

Thanks for the responses. I think I got it figured out.


cricman