Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > Equipment and Tuning
 
Thread Tools Display Modes
Old 08-14-2018, 10:50 AM   #1
Jared.King
Ten Point
 
Jared.King's Avatar
 
Join Date: Feb 2014
Location: Denver City, TX
Hunt In: Eden, TX and Yoakum County
Default Ramcat Quiver

Can anyone recommend a quiver that will work with ramcats? I'm using the 125 grain with the 1.5" cut. My quiver allows the blades to stick out. I've found the ramcat quiver online for $100+ but I'm not going to spend that much on a quiver. Any suggestions?
Jared.King is online now   Reply With Quote Back To The Top
Old 08-14-2018, 11:03 AM   #2
ultrastealth
Ten Point
 
ultrastealth's Avatar
 
Join Date: Dec 2006
Location: Katy
Hunt In: Camp Wood, TX
Default

Honesty, the Ramcat Quiver is the only one that I've found that fits them well. Take a look at what other quivers cost. $100 is pretty average these days.
ultrastealth is offline   Reply With Quote Back To The Top
Old 08-14-2018, 11:15 AM   #3
Jared.King
Ten Point
 
Jared.King's Avatar
 
Join Date: Feb 2014
Location: Denver City, TX
Hunt In: Eden, TX and Yoakum County
Default

Quote:
Originally Posted by ultrastealth View Post
Honesty, the Ramcat Quiver is the only one that I've found that fits them well. Take a look at what other quivers cost. $100 is pretty average these days.
I don't know where you are buying quivers, but most I see are sub $50, and a ton that are $39.
Jared.King is online now   Reply With Quote Back To The Top
Old 08-14-2018, 01:20 PM   #4
dk_ace
Four Point
 
Join Date: Jan 2013
Location: Sherman
Hunt In: Grayson and Lamar
Default

The standard treelimb quiver fits them. I don’t know about the premium one but the standard one fits them.

D
dk_ace is offline   Reply With Quote Back To The Top
Old 08-14-2018, 01:37 PM   #5
Jared.King
Ten Point
 
Jared.King's Avatar
 
Join Date: Feb 2014
Location: Denver City, TX
Hunt In: Eden, TX and Yoakum County
Default

Quote:
Originally Posted by dk_ace View Post
The standard treelimb quiver fits them. I donít know about the premium one but the standard one fits them.

D
I'll look into them! Thanks
Jared.King is online now   Reply With Quote Back To The Top
Old 08-14-2018, 01:38 PM   #6
canny
Pope & Young
 
canny's Avatar
 
Join Date: Oct 2008
Location: Lufkin
Hunt In: Houston & Zavalla
Default

I'm using the Apex Gamechanger with my Ramcat Single Bevels but they aren't as large of cut as yours.
canny is offline   Reply With Quote Back To The Top
Old 08-14-2018, 01:38 PM   #7
Jared.King
Ten Point
 
Jared.King's Avatar
 
Join Date: Feb 2014
Location: Denver City, TX
Hunt In: Eden, TX and Yoakum County
Default

Quote:
Originally Posted by canny View Post
I'm using the Apex Gamechanger with my Ramcat Single Bevels but they aren't as large of cut as yours.
How much room do you have left?
Jared.King is online now   Reply With Quote Back To The Top
Old 08-14-2018, 02:24 PM   #8
canny
Pope & Young
 
canny's Avatar
 
Join Date: Oct 2008
Location: Lufkin
Hunt In: Houston & Zavalla
Default

Quote:
Originally Posted by Jared.King View Post
How much room do you have left?
I'd say about 1/4" between blade tips, but that's just an estimate.
canny is offline   Reply With Quote Back To The Top
Old 08-15-2018, 06:46 AM   #9
Mudslinger
Pope & Young
 
Mudslinger's Avatar
 
Join Date: Oct 2006
Location: Lubbock, TX
Hunt In: Kent Co., Stonewall Co., CO, Limpopo RSA
Default

These quivers will fit any of the Ramcats and quiet a bit cheaper than most and very well built. A local Texas company to boot!
Mudslinger is offline   Reply With Quote Back To The Top
Old 08-15-2018, 11:21 AM   #10
Jared.King
Ten Point
 
Jared.King's Avatar
 
Join Date: Feb 2014
Location: Denver City, TX
Hunt In: Eden, TX and Yoakum County
Default

Quote:
Originally Posted by Mudslinger View Post
These quivers will fit any of the Ramcats and quiet a bit cheaper than most and very well built. A local Texas company to boot!
What quiver and company?
Jared.King is online now   Reply With Quote Back To The Top
Old 08-15-2018, 11:29 AM   #11
44mAG
Ten Point
 
44mAG's Avatar
 
Join Date: Dec 2015
Location: Buda, TX
Default

I use an old Diamond brand quiver. It has just a simple piece of foam that you push the broad heads into. Works great for my Ramcats but I doubt they still sale it.

44mAG is offline   Reply With Quote Back To The Top
Old 08-16-2018, 12:21 PM   #12
Mudslinger
Pope & Young
 
Mudslinger's Avatar
 
Join Date: Oct 2006
Location: Lubbock, TX
Hunt In: Kent Co., Stonewall Co., CO, Limpopo RSA
Default

Quote:
Originally Posted by Jared.King View Post
What quiver and company?
EW Bateman. The bow or hip quiver.
Mudslinger is offline   Reply With Quote Back To The Top
Old 08-16-2018, 03:39 PM   #13
dk_ace
Four Point
 
Join Date: Jan 2013
Location: Sherman
Hunt In: Grayson and Lamar
Default

Quote:
Originally Posted by Mudslinger View Post
EW Bateman. The bow or hip quiver.
I looked at their website, but they donít include the details on the broadhead sizes that fit in their various quivers. Iíve been curious about trying a hip quiver and Iím particularly interested in quivers that fit very large heads.

D
dk_ace is offline   Reply With Quote Back To The Top
Old 08-16-2018, 09:32 PM   #14
dadams
Four Point
 
dadams's Avatar
 
Join Date: May 2013
Location: Tulsa, Oklahoma
Hunt In: SE Oklahoma
Default

Kwikee Hi 5 works great with the 1-1/2” Ramcat.
dadams is offline   Reply With Quote Back To The Top
Old 08-16-2018, 09:38 PM   #15
Slick8
Pope & Young
 
Slick8's Avatar
 
Join Date: Mar 2009
Location: Richmond, Texas
Hunt In: In the woods
Default

Quote:
Originally Posted by dk_ace View Post
The standard treelimb quiver fits them. I donít know about the premium one but the standard one fits them.

D
This is what I've been using for several years on three different bows. I've changed the foam inert out once and am ready to do it again.
Slick8 is offline   Reply With Quote Back To The Top
Old 08-17-2018, 06:32 AM   #16
Mudslinger
Pope & Young
 
Mudslinger's Avatar
 
Join Date: Oct 2006
Location: Lubbock, TX
Hunt In: Kent Co., Stonewall Co., CO, Limpopo RSA
Default

Quote:
Originally Posted by dk_ace View Post
I looked at their website, but they donít include the details on the broadhead sizes that fit in their various quivers. Iíve been curious about trying a hip quiver and Iím particularly interested in quivers that fit very large heads.

D
I will measure the inside ti inside if the quiver head I have. It is the hip quiver, but uses the same size head as the bow mounted quiver. Believe me, they will hold the 125 grain head with NO PROBLEM.
Mudslinger is offline   Reply With Quote Back To The Top
Old 08-17-2018, 11:09 AM   #17
dk_ace
Four Point
 
Join Date: Jan 2013
Location: Sherman
Hunt In: Grayson and Lamar
Default

Quote:
Originally Posted by Slick8 View Post
This is what I've been using for several years on three different bows. I've changed the foam inert out once and am ready to do it again.
They have a new rubber insert thatís supposed to be nice and an upgrade over the foam. I havenít tried it myself though. Iíve used that quiver for 3 or 4 years now as well. Using a Mathews this year. I like the Mathews design better than everything else Iíve used and seen, but it doesnít accommodate large heads. The ramcats for instance donít work well. They sorta can fit, but not well enough that Iím interested in using them with the Mathews quiver.

D
dk_ace is offline   Reply With Quote Back To The Top
Old 08-17-2018, 11:09 AM   #18
dk_ace
Four Point
 
Join Date: Jan 2013
Location: Sherman
Hunt In: Grayson and Lamar
Default

Quote:
Originally Posted by Mudslinger View Post
I will measure the inside ti inside if the quiver head I have. It is the hip quiver, but uses the same size head as the bow mounted quiver. Believe me, they will hold the 125 grain head with NO PROBLEM.
Thanks! Iím interested to see how large of a head they will hold.

D
dk_ace is offline   Reply With Quote Back To The Top
Old 08-17-2018, 06:27 PM   #19
Mudslinger
Pope & Young
 
Mudslinger's Avatar
 
Join Date: Oct 2006
Location: Lubbock, TX
Hunt In: Kent Co., Stonewall Co., CO, Limpopo RSA
Default

EW Bateman - http://ewbateman.com/HuntingQuivers.htm - a local Texas company that has been around for over 35 years makes both a hip and a bow mounted quiver that will work. I have used both, but exclusively the hip quiver for the last 30 years with no problems. The space in the quiver hood is 1 7/8" from side to side, plenty of room to fit the Ramcats. The only thing I have ever done to this quiver is to put a new foam insert in it. I have no afiliation with this company, but people complain about this so I give you the solution. You may not be able to put a full quiver of 8 arrows, but I have put 6 in all with Ramcats with no problems on blade clearance.
Mudslinger is offline   Reply With Quote Back To The Top
Old 08-17-2018, 08:19 PM   #20
Jared.King
Ten Point
 
Jared.King's Avatar
 
Join Date: Feb 2014
Location: Denver City, TX
Hunt In: Eden, TX and Yoakum County
Default

Quote:
Originally Posted by Mudslinger View Post
EW Bateman - http://ewbateman.com/HuntingQuivers.htm - a local Texas company that has been around for over 35 years makes both a hip and a bow mounted quiver that will work. I have used both, but exclusively the hip quiver for the last 30 years with no problems. The space in the quiver hood is 1 7/8" from side to side, plenty of room to fit the Ramcats. The only thing I have ever done to this quiver is to put a new foam insert in it. I have no afiliation with this company, but people complain about this so I give you the solution. You may not be able to put a full quiver of 8 arrows, but I have put 6 in all with Ramcats with no problems on blade clearance.
Yes! Exactly the info I was looking for. I will be purchasing the bow quiver. Thanks!
Jared.King is online now   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1999-2012, TexasBowhunter.com