I need a gunsmith in Ft. Worth area. Any recommendations?

[mikemorvan]

I have a Remington 870 Super Magnum shotgun that will not recycle shells properly. Change that, will not recycle shells at all. Any recommendations of a good gunsmith in Ft. Worth before i throw the thing in the recycle bin?

[RShockley]

Checkout Panther City Firearms.

[Take em]

Elk Castle on 30 near 820.


Sent from my iPhone using Tapatalk

[Take em]

I also have a recycle bin if you don’t have one handy [emoji41]


Sent from my iPhone using Tapatalk

[LWD]

Euless Guns and Ammo

LWD

[DRT]

Elk Castle on 30 near 820.


Sent from my iPhone using Tapatalk

Haven't used them in a few years but they used to have a good staff.

[gfulton]

Big Dave at Elk Castle...……...

[sandbill]

Big Dave at Elk Castle...……...

This

[mikemorvan]

Big Dave at Elk Castle...……...

Inside the loop? Phone number?

[randal]

Have you tried different ammo? Mine won't work with the cheap Winchester.. someone told me the brass is thinner and expands more than others and will wedge its self in there making it hard to eject. I changed ammo to something like Remington heavy dove or sts, Winchester AA etc. and it solved the problem..

[mikemorvan]

Inside the loop? Phone number?

Found it. Thanks.

[BigDraw]

I had the same issue, an extractor bar I think, pops out of the receiver

[mikemorvan]

Have you tried different ammo? Mine won't work with the cheap Winchester.. someone told me the brass is thinner and expands more than others and will wedge its self in there making it hard to eject. I changed ammo to something like Remington heavy dove or sts, Winchester AA etc. and it solved the problem..

I've tried all kinds of ammo. I do think it has to do with ammo though. It seems to eject unfired shells fine. But once fired, no go. But it doesn't seem to matter what type of ammo i use. I can't put up with a shotgun that is so persnickety that it will only fire one type of shell. I won't tolerate that foolishness from a shotgun.

[125Dad]

There’s a place in Keller at the corner of 1709 and Navajo. I took a rifle in to have a trigger job the guy said he could adjust it. Took him about 30 minutes while I waited.

Seamed like a nice enough guy.

[Pullersboy]

Elk Castle on 30 near 820.


Sent from my iPhone using Tapatalk

Yep. If David is still the gunsmith there, you're in business. He's good to go. Done me right a few times.