Just finished making a roof mounted bow holder for the roof of the Ranger. Seems to fit nice and sung, will take for test ride tomorrow.
Announcement
Collapse
No announcement yet.
Roof Mounted Bow Holder for Ranger
Collapse
X
-
I made a "U" holder out of angle and flat iron. Lined it with 1/4 inch closed cell foam. The key was to make the "U" the size of your riser plus the foam. I then set them at the correct angle so the bow will slide into the "U" brackets and welded them to a two foot flat to mount to the roof.
I have a bolt where the string is and you can simply pull the string "back" over the bolt to keep the bow from moving.
Hope this helps.
Last edited by Okiehunter; 10-19-2014, 03:42 PM.
Comment
Comment