I have a Hoyt GM2 What are some alternative limbs could I bolt up without any modifying to them? I've read that ilf limbs would bolt up with a bushing kit.
Announcement
Collapse
No announcement yet.
Limbs for my GM 2
Collapse
X
-
I am not that familiar with the multitude of risers that Hoyt builds. I know that ilf limbs can have the dovetail removed and a small bushing inserted to bring the hole down to the right size to fit the pin on the Dorado bows. Perhaps that is the same situation on your riser. There is quite a bit of information to be found on Trad Talk where the guys are more into warfing old compound risers and are familiar with what limbs fit what bow, etc.
Comment