It's my DIY project. Started as an 86 883 Sportster. Stretched the swing arm 5" and made it a mono shock. Did a drop seat on the frame and took a set of 5 gallon fat bobs from a Shovel head, split them, welded into one tank and then cut that in half basically to make the oil tank. Everything but the machine work on the motor has been done by me. Steel work, powder coat, paint and the engine work. I also built the handle bars as well as the stainless devils tail fender brace.
What I started with
As of now. Mock up is almost finished
What I started with
As of now. Mock up is almost finished
Comment