D-I-Y ground blind with hog panels?

[WestTXReaper]

any Ideas how to make a quick D-I-Y bling out of hog panels, might build one for opening weekend if I can get done quickly... any help is appreciated.

Pictures are helpful as I can build just about anything I see.

[Topp7]

I'm sure all you would need are the panels, pair or kleins and some tie wire.
I use wire to secure my natural ground blinds. You can do pretty much anything with wire.
I'm sure the panels will work as great support for limbs and such.

[BolilloLoco]

Do a search. There have been several threads this year.

[WestTXReaper]

Thanx did a search and have a few ideals

[jimmyneutrontx]

16 foot hog panel
4ft door.
5 pieces of 1/2 electrical conduit
3 sections for roof frame
2 sections rapped around roof frame for support

1 roll 3 mil plastic. Secured to hog panel with zip ties

Tip. Cut plastic rap hog panel. With separate piece cover roof.

Brush in

[jimmyneutrontx]

Picture of my door being built

[bgleaton]

Well done sir. Do you have any pictures inside looking up at your roof?

[WestTXReaper]

Awesome thanx

[jimmyneutrontx]

Unfortunately no but check this post it included pictures of roof frames that I modeled mine after

http://discussions.texasbowhunter.com/forums/showthread.php?t=541260