Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > D-I-Y Projects
 
Thread Tools Display Modes
Old 04-24-2012, 09:42 AM   #1
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default my version of the cattle panel blind

I mimicked several ideas I got from tbh'ers and this is what I came up with. I used remesh from Home Depot instead of cattle/ hog panels:
Name:  ImageUploadedByTapatalk1335277792.578007.jpg
Views: 6133
Size:  110.1 KB
Wired it up mainly with the excess tabs and a few pieces of baling wire:
Name:  ImageUploadedByTapatalk1335277867.241433.jpg
Views: 5282
Size:  111.4 KB
I wanted a big enough stand to fit two comfortably so I went for a 6' diameter and a domed roof. We cut strips of equal lengths to make sure the overall shape was somewhat symmetrical:
Name:  ImageUploadedByTapatalk1335277946.338334.jpg
Views: 5210
Size:  98.8 KB
We covered the roof in 2 mil plastic just to provide a little extra protection against the wet stuff:
Name:  ImageUploadedByTapatalk1335278066.729017.jpg
Views: 5246
Size:  95.0 KB
Then came the messy part; dipping the sheets in exterior latex paint and wrapping the whole thing:
Name:  ImageUploadedByTapatalk1335278153.358705.jpg
Views: 8304
Size:  95.3 KB
My hands were covered in paint during this process so no action pics. We immediately cut the door and windows. I cut another piece of remesh that would overlap the whole door opening and skinned it with an old military tarp using zip ties. We connected it from the inside so it swings up:
Name:  ImageUploadedByTapatalk1335278320.845094.jpg
Views: 5231
Size:  51.2 KB
Name:  ImageUploadedByTapatalk1335278352.710012.jpg
Views: 5293
Size:  78.8 KB
I plan to use a hook system to attach either shoot through mesh or camo netting. We didn't cut out windows near the back of it to prevent being silhouetted. Depending on positioning, we may re-think that. I think once it fully dries, the paint will really add a lot of protection from the elements. Probably more than I expected. Let me know what you guys think.
Name:  ImageUploadedByTapatalk1335278381.796597.jpg
Views: 5213
Size:  82.0 KB

Last edited by Dchilds; 04-24-2012 at 09:48 AM.
Dchilds is offline   Reply With Quote Back To The Top
Old 04-24-2012, 09:44 AM   #2
BIG D
Pope & Young
 
BIG D's Avatar
 
Join Date: Oct 2006
Location: Shiner/Hutto
Hunt In: Lavaca, Zavala County
Default

Nice!!
BIG D is offline   Reply With Quote Back To The Top
Old 04-24-2012, 09:49 AM   #3
Matt_C
Ten Point
 
Matt_C's Avatar
 
Join Date: Oct 2009
Location: McKinney, Tx
Hunt In: Oklahoma
Default

That is a great idea... Are you going to paint the cover with green, black or gray's
Matt_C is offline   Reply With Quote Back To The Top
Old 04-24-2012, 10:05 AM   #4
TheRealHatfield
Ten Point
 
TheRealHatfield's Avatar
 
Join Date: Dec 2009
Location: Tomball, Tx
Hunt In: Muldoon, Tx Oakhurst, Tx
Default

looks good. im curious to see the durability of these. do you know if they will last longer than a pop up? i understand you could just re-sheet them but just a thought.
TheRealHatfield is offline   Reply With Quote Back To The Top
Old 04-24-2012, 10:20 AM   #5
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by CBMatt View Post
That is a great idea... Are you going to paint the cover with green, black or gray's
I plan to lay down a little spray paint after it dries. It was still pretty wet when we left on Sunday after having put it together on Saturday afternoon. That might give you an idea of how soaked those sheets were. Plus it was pretty humid outside. I will also do some brushing in.


Quote:
Originally Posted by TheRealHatfield View Post
looks good. im curious to see the durability of these. do you know if they will last longer than a pop up? i understand you could just re-sheet them but just a thought.
I thought about a popup but had some reservations about them. It would have been hard for me to find a pop up the exact dimensions I was looking for. If I did find one, I would guess it would be in the $200 price range; but probably more. I did not want to leave a $200 pop up outside all season. I also think the skin on this thing will be more resistant to the elements. On top of all this, the roll of remesh was $107. I can build a lot of these with the 150’ roll. I think the total used here was around 35’. Paint was free and the sheets were $10 at Goodwill but I probably could have gotten those for free if I’d asked friends and family.

One thing I would have liked to have when putting this together is some kind of “ring” to use as a frame for the floor. This one will sit on the ground but I wish there was a little more rigidity to the structure near the bottom. Probably over-engineering in my head a little but it would make me more comfortable moving it around and what not.
Dchilds is offline   Reply With Quote Back To The Top
Old 04-24-2012, 10:22 AM   #6
jerp
Pope & Young
 
jerp's Avatar
 
Join Date: Oct 2006
Location: Aledo
Hunt In: Shackleford Co.
Default

I like that idea a lot. I think it is wise to not have shooting windows in the back (other than maybe small viewing windows you can open and take a peek behind you) How much paint, and how many sheets did it take?
jerp is online now   Reply With Quote Back To The Top
Old 04-24-2012, 12:45 PM   #7
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by jerp View Post
I like that idea a lot. I think it is wise to not have shooting windows in the back (other than maybe small viewing windows you can open and take a peek behind you) How much paint, and how many sheets did it take?
I think I ended up using two fitted queen sheets and two and a half flat queen sheets. I tried to leave them all in tact to avoid unnecessary seams. I used about four gallons of paint, believe it or not. I rolled on an extra coat (mistily focusing on the top) Sunday morning.

Couple other things I've thought about. I would probably use king sheets if I had the choice. Even less seams. This seems funny but I'd probably try to find sheets that are rougher and/or thicker than what I had. Mine seemed pretty thin. Once they're on there, I don't think it matters but getting them stretched over the blind gave us a little trouble. They seemed to snag and nearly rip a few times. I might cut a small viewing hole in the back just to be able to peek out if I hear something back there.
Dchilds is offline   Reply With Quote Back To The Top
Old 04-24-2012, 12:49 PM   #8
Charlie6Delta
Ten Point
 
Charlie6Delta's Avatar
 
Join Date: Mar 2011
Location: Lindale, TX
Hunt In: Behind my house
Default

Nice job!
Charlie6Delta is offline   Reply With Quote Back To The Top
Old 04-24-2012, 01:47 PM   #9
texan16
Ten Point
 
texan16's Avatar
 
Join Date: Dec 2009
Location: Fairfield
Hunt In: Freestone/Schleicher Counties
Default

Very nice.
texan16 is offline   Reply With Quote Back To The Top
Old 04-24-2012, 02:21 PM   #10
Blue Tick
Pope & Young
 
Blue Tick's Avatar
 
Join Date: Dec 2006
Location: Tomball
Hunt In: Crockett Co
Default

Looks great. Please post up some finished pics as well.
Blue Tick is offline   Reply With Quote Back To The Top
Old 04-24-2012, 05:46 PM   #11
Leonhogboy
Pope & Young
 
Leonhogboy's Avatar
 
Join Date: Oct 2006
Location: Austin
Hunt In: Coryell Co, Lee Co, Idaho, & Anywhere invited
Default

Nice work.
Leonhogboy is offline   Reply With Quote Back To The Top
Old 04-24-2012, 08:41 PM   #12
unclefish
Pope & Young
 
unclefish's Avatar
 
Join Date: Oct 2006
Location: Katy, TX
Hunt In: Elk in CO....Deer in Lyons, TX
Default

Cool blind. About how tall inside is it?
unclefish is offline   Reply With Quote Back To The Top
Old 04-24-2012, 08:51 PM   #13
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by unclefish View Post
Cool blind. About how tall inside is it?
In the middle it's around 6'7". I wanted the option to stand and shoot if I ever needed to. I'm 6'3" so it works.

The window height would probably make a standing shot tough but I like the extra space.
Dchilds is offline   Reply With Quote Back To The Top
Old 04-24-2012, 09:03 PM   #14
CletusBodeen
Pope & Young
 
CletusBodeen's Avatar
 
Join Date: Feb 2007
Location: West
Hunt In: On da couch
Default

Looks good. I may try one of these myself.
CletusBodeen is offline   Reply With Quote Back To The Top
Old 04-25-2012, 07:42 AM   #15
jathomas437
Ten Point
 
jathomas437's Avatar
 
Join Date: Aug 2009
Location: Angleton
Hunt In: Tyler County
Default

That aught to work out just fine. Nice job.
jathomas437 is offline   Reply With Quote Back To The Top
Old 04-25-2012, 07:46 AM   #16
awatsonjr
Banned!!!
 
Join Date: Jan 2011
Location: jasper texas
Default

I like it
awatsonjr is offline   Reply With Quote Back To The Top
Old 04-25-2012, 08:16 AM   #17
Texastaxi
Pope & Young
 
Texastaxi's Avatar
 
Join Date: Oct 2006
Location: West of Houston
Hunt In: now accepting invitations!
Default

Very ingenuitive! I like it and will be looking forward to the finished pictures!
Texastaxi is offline   Reply With Quote Back To The Top
Old 04-25-2012, 11:36 AM   #18
austinmike
Ten Point
 
austinmike's Avatar
 
Join Date: Jan 2010
Location: Cedar creek tx
Hunt In: Driftwood tx
Default

is it done
austinmike is offline   Reply With Quote Back To The Top
Old 04-25-2012, 11:51 AM   #19
Big-Ed
Four Point
 
Big-Ed's Avatar
 
Join Date: Oct 2009
Location: Central Texas
Hunt In: Brown and McCulloch Counties
Default

could you just apply the paint in a heavy coat(s) without having to soak the sheets?
Big-Ed is offline   Reply With Quote Back To The Top
Old 04-25-2012, 12:43 PM   #20
CletusBodeen
Pope & Young
 
CletusBodeen's Avatar
 
Join Date: Feb 2007
Location: West
Hunt In: On da couch
Default

Quote:
Originally Posted by Big-Ed View Post
could you just apply the paint in a heavy coat(s) without having to soak the sheets?
That's one my thoughts too.
CletusBodeen is offline   Reply With Quote Back To The Top
Old 04-25-2012, 12:49 PM   #21
super_dave
Pope & Young
 
super_dave's Avatar
 
Join Date: Mar 2011
Location: Van
Hunt In: NW Smith County
Default

Why not black latex paint?
super_dave is online now   Reply With Quote Back To The Top
Old 04-25-2012, 12:53 PM   #22
Coach W
Banned!!!
 
Join Date: Jan 2011
Hunt In: Dickens, Kent
Default

I like it alot. and am ready to build my own.

Quick Question: How do the sheets stay on the blind? are they attached in any way? Or just stuck by paint? We have some pretty nasty wind out our way...
Coach W is offline   Reply With Quote Back To The Top
Old 04-25-2012, 12:59 PM   #23
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by Coach W View Post
I like it alot. and am ready to build my own.

Quick Question: How do the sheets stay on the blind? are they attached in any way? Or just stuck by paint? We have some pretty nasty wind out our way...
Yea, the sheets just stick to themselves and to the cage. No other attachment necessary. In fact, after it dries, I think it would be dang near impossible to get the sheets apart. I think it's stout enough to be staked down and the wind wouldn't be an issue.
Dchilds is offline   Reply With Quote Back To The Top
Old 04-25-2012, 01:00 PM   #24
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by super_dave View Post
Why not black latex paint?
I just went with what was free. Luckily, it was somewhat of a "natural" color. If I had the option, I think i'd rather have a dark brown or green versus black.
Dchilds is offline   Reply With Quote Back To The Top
Old 04-25-2012, 01:03 PM   #25
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by Big-Ed View Post
could you just apply the paint in a heavy coat(s) without having to soak the sheets?
I guess you could. I think you would have trouble getting the same coverage though. The paint probably sounds messier than it actually is. Just wear some rubber gloves and it's not too bad.

And, no, it's just 100% done. I need to figure out some mesh or netting to cover the windows until shooting time. I was thinking shoot through mesh... But I shoot Grim Reapers once in a while and don't want to affect accuracy. My thought is to have some camo netting hanging from hooks and be able to hook it up out of the way when I see something. Any ideas on this are appreciated.

Last edited by Dchilds; 04-25-2012 at 01:07 PM.
Dchilds is offline   Reply With Quote Back To The Top
Old 04-25-2012, 01:20 PM   #26
JFISHER
Pope & Young
 
JFISHER's Avatar
 
Join Date: Jan 2008
Location: Brownwood
Hunt In: BWD
Default

Quote:
Originally Posted by Dchilds View Post
I just went with what was free. Luckily, it was somewhat of a "natural" color. If I had the option, I think i'd rather have a dark brown or green versus black.
Might have been a good time to apply some natural camo... while it is still wet and sticky, have a shovel handy(dry dirt preferably) and several piles of dried mower or shredder clippings....

fling away.

Then come back with OD, brown etc spray paint to hit the remaining white.
JFISHER is offline   Reply With Quote Back To The Top
Old 04-25-2012, 01:50 PM   #27
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by CutTheLoop View Post
Might have been a good time to apply some natural camo... while it is still wet and sticky, have a shovel handy(dry dirt preferably) and several piles of dried mower or shredder clippings....

fling away.

Then come back with OD, brown etc spray paint to hit the remaining white.
That's a great idea. Maybe I'll roll on another coat and use this idea.
Dchilds is offline   Reply With Quote Back To The Top
Old 04-25-2012, 03:35 PM   #28
Bearkat
Eight Point
 
Bearkat's Avatar
 
Join Date: Dec 2011
Location: Fairfield, Texas
Hunt In: Abilene, Vernon, Kansas
Default

I was think about doing the same concept except instead of soaking the sheets, paint over them with Herculiner bed liner. A little more expensive but it would weather proof it and would last forever. I was looking at it last night, and Amazon has a kit to cover a 6' truck bed for $80. I am guessing that would be about the same amount for blind. Any thoughts? Anybody tried something similar?
Bearkat is offline   Reply With Quote Back To The Top
Old 04-25-2012, 04:11 PM   #29
CletusBodeen
Pope & Young
 
CletusBodeen's Avatar
 
Join Date: Feb 2007
Location: West
Hunt In: On da couch
Default

Quote:
Originally Posted by Bearkat View Post
I was think about doing the same concept except instead of soaking the sheets, paint over them with Herculiner bed liner. A little more expensive but it would weather proof it and would last forever. I was looking at it last night, and Amazon has a kit to cover a 6' truck bed for $80. I am guessing that would be about the same amount for blind. Any thoughts? Anybody tried something similar?
I think you would probably need 2 kits for full coverage.
CletusBodeen is offline   Reply With Quote Back To The Top
Old 04-25-2012, 04:40 PM   #30
txtimetravler
Pope & Young
 
txtimetravler's Avatar
 
Join Date: Oct 2006
Location: Round Rock
Hunt In: DeWitt County
Default

Reminds me of a huge paper mâché project
txtimetravler is offline   Reply With Quote Back To The Top
Old 04-25-2012, 07:55 PM   #31
Crews
Ten Point
 
Crews's Avatar
 
Join Date: Feb 2012
Location: Dallas, Tx
Hunt In: East Texas
Default

Nice!
Crews is offline   Reply With Quote Back To The Top
Old 04-26-2012, 07:07 AM   #32
Stan R
Pope & Young
 
Stan R's Avatar
 
Join Date: Apr 2008
Location: Madisonville
Hunt In: Madison and Colorado County
Default

Very nice!
Stan R is offline   Reply With Quote Back To The Top
Old 04-26-2012, 09:35 AM   #33
Ron
Pope & Young
 
Ron's Avatar
 
Join Date: Jan 2009
Location: Kings Creek Golf Club, Kemp TX
Hunt In: USA, Concho County and S.E.Colorado
Default

I like it. You did a good job.
Ron is offline   Reply With Quote Back To The Top
Old 04-26-2012, 10:10 AM   #34
Electrican
Pope & Young
 
Electrican's Avatar
 
Join Date: Oct 2011
Location: Burleson TX
Hunt In: for a lease
Default

That turned out great. I am going to be building a couple of these now. Just been thinking about what else could be used besides paint for more duarbility. What about using resin to coat sheets? Be a little more expensive but it may provide more waterproofing?
Electrican is online now   Reply With Quote Back To The Top
Old 04-26-2012, 10:18 AM   #35
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by Electrican View Post
That turned out great. I am going to be building a couple of these now. Just been thinking about what else could be used besides paint for more duarbility. What about using resin to coat sheets? Be a little more expensive but it may provide more waterproofing?
I liked paint for its waterproofing and durability. Would the hardness of resin work to your disadvantage? Cracking issues? I haven't fiberglassed anything so I don't know much about that.

Paint is also really cheap. People usually have gallons sitting in the garage from projects. I really built this for the value, not the longevity - although, I do think it will last a couple seasons, minimum.
Dchilds is offline   Reply With Quote Back To The Top
Old 04-26-2012, 11:02 AM   #36
HogHunterBall
Banned!!!
 
Join Date: Apr 2012
Location: TX
Hunt In: Central TX
Default

wow this is awesome!!!! I cant wait to see the finished product. Might have to do this.

Is that plastic pretty reliable in terms of not leaking or letting water in?
HogHunterBall is offline   Reply With Quote Back To The Top
Old 04-26-2012, 11:12 AM   #37
KactusKiller
Pope & Young
 
KactusKiller's Avatar
 
Join Date: Dec 2007
Location: Midlothian, TX
Hunt In: Irion co, Navarro Co
Default

As far as durability and weatherproofing goes the paint will be fine, get a 100% acrylic Satin or Semi gloss exterior paint. The higher the shine=the higher the resin which will make it more flexible and weather resistant. Don't use interior especially flat and no oil base.

Also the plastic really isn't needed. It will keep the paint from bonding to the panels. Also the paint itself will seal the roof good enough. I would just make sure to have all the seams on the sides and add an additional heavy coat to the roof once the first application dries.

Last edited by KactusKiller; 04-26-2012 at 11:14 AM.
KactusKiller is offline   Reply With Quote Back To The Top
Old 04-26-2012, 11:45 AM   #38
wellingtontx
Ten Point
 
wellingtontx's Avatar
 
Join Date: Feb 2009
Hunt In: Collingsworth County, Texas
Default

What about dying the sheets black before using followed by black paint ?? I know black paint is hard to find in the scrap or return bins at the big box hardware stores.

What about wiring a bunch of old free pallets together, then covering them with the paint soaked sheets ?

Last edited by wellingtontx; 04-26-2012 at 11:50 AM.
wellingtontx is offline   Reply With Quote Back To The Top
Old 12-21-2015, 02:24 PM   #39
SwampRabbit
Pope & Young
 
SwampRabbit's Avatar
 
Join Date: Mar 2013
Location: Tomball, TX
Hunt In: Hill Country & East Texas
Default

Quote:
Originally Posted by Dchilds View Post
How did this thing hold up? Did it harden like you expected?
SwampRabbit is offline   Reply With Quote Back To The Top
Old 12-21-2015, 02:28 PM   #40
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by SwampRabbit View Post
How did this thing hold up? Did it harden like you expected?

It's held up extremely well. My use of it has been limited but if I encounter a downpour during a hunt I'll scurry out of the treestand into it. The blind looks the same today as it did three years ago. Vegetation has grown up around it to a degree but it's in great shape. I attribute that, at least partially, to the fact that I used higher grade exterior paint from Benjamin Moore. That happened to be what I had laying around not getting used at the time.
Dchilds is offline   Reply With Quote Back To The Top
Old 12-21-2015, 02:43 PM   #41
SwampRabbit
Pope & Young
 
SwampRabbit's Avatar
 
Join Date: Mar 2013
Location: Tomball, TX
Hunt In: Hill Country & East Texas
Default

I built a few cattle panel blinds this year and used weed guard as a skin. It worked very well, except for the cows. They went to the material around the windows and tore it up. I really wanted something a little less flappy/soft around the windows and I remembered this thread. I'm going to have to do some experimenting with this idea for next year.

Thanks for the quick response!
SwampRabbit is offline   Reply With Quote Back To The Top
Old 12-21-2015, 08:49 PM   #42
GIL HUNTS
Eight Point
 
GIL HUNTS's Avatar
 
Join Date: Dec 2012
Hunt In: Looking for a lease. Hunted Gillespie county for over 40 years. The search begins...
Default

Neat blind.
GIL HUNTS is offline   Reply With Quote Back To The Top
Old 12-21-2015, 09:24 PM   #43
Killer Miller
Ten Point
 
Killer Miller's Avatar
 
Join Date: Nov 2009
Location: Sulphur Springs, Tx
Hunt In: Sulphur Springs & Georgetown
Default

Nice
Killer Miller is offline   Reply With Quote Back To The Top
Old 12-21-2015, 09:39 PM   #44
DKirk
Ten Point
 
DKirk's Avatar
 
Join Date: Nov 2011
Location: Lake Jackson
Default

I like it!
DKirk is offline   Reply With Quote Back To The Top
Old 12-22-2015, 10:05 AM   #45
4tonns
Four Point
 
Join Date: Oct 2011
Location: Southwest Louisiana
Hunt In: SW La and Hill Country
Default blind

That is a cool idea that I might steal for next season. I have a few questions. Did you build it one site or move it? If you moved it, how well did it hold up? Have you had to touch it up with more paint after each season? Is the roof plastic holding up?
4tonns is offline   Reply With Quote Back To The Top
Old 12-22-2015, 10:11 AM   #46
8pointer
Pope & Young
 
8pointer's Avatar
 
Join Date: Feb 2011
Location: San Antonio, TX
Hunt In: Schleicher county
Default

Turned out great
8pointer is offline   Reply With Quote Back To The Top
Old 12-22-2015, 04:06 PM   #47
skipetex
Eight Point
 
skipetex's Avatar
 
Join Date: Jun 2012
Location: Hughes Springs
Hunt In: Blackwell
Default

Awesome idea. Will be doing this
skipetex is offline   Reply With Quote Back To The Top
Old 12-22-2015, 07:32 PM   #48
Ted
Ten Point
 
Ted's Avatar
 
Join Date: Oct 2006
Location: Fort Worth, TX
Default

How about the latex roof coating instead of paint?
Ted is offline   Reply With Quote Back To The Top
Old 12-22-2015, 08:56 PM   #49
Dchilds
Ten Point
 
Dchilds's Avatar
 
Join Date: Aug 2010
Location: Richardson
Hunt In: Red River Co.
Default

Quote:
Originally Posted by 4tonns View Post
That is a cool idea that I might steal for next season. I have a few questions. Did you build it one site or move it? If you moved it, how well did it hold up? Have you had to touch it up with more paint after each season? Is the roof plastic holding up?

I built it at camp and trailered it back to its spot. That was the sketchiest part just because I was afraid of a limb poking a hole in it. I literally haven't done anything to it since dropping it in place and the materials have held up great. The only thing I would probably do differently is that I'd make the door slightly higher up on the wall so that it doesn't snag vegetation as it opens and closes.
Dchilds is offline   Reply With Quote Back To The Top
Old 12-22-2015, 09:17 PM   #50
mpotts
Ten Point
 
mpotts's Avatar
 
Join Date: Jun 2010
Location: texas
Hunt In: Lometa Tx
Default

that is a great looking blind
mpotts is offline   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1999-2012, TexasBowhunter.com