We're building this for our very own TXChickenRanch this week. The smoke chamber is 26" OD 5/16" wall pipe and is 44" long. Firebox is 1/4" plate and measures 26"x20"x22" and will have some goodies on it. The pit is a reverse flow, but the bottom baffle will be removable to allow for a charcoal tray to also grill on. Heres a few pics of current progress, I'll update the thread every couple hours as we work on it!
Pipe and 5x10 of 1/4" plate ready to cut. It was a bear to load that 500 lb plate onto the table with only two of us!
Drew it up in CAD ready to cut:
Here's a time lapse video of the machine cutting it out!
All cleaned up ready to tack. Those are 5" 600 lb casters we're going to use on her!
Pipe and 5x10 of 1/4" plate ready to cut. It was a bear to load that 500 lb plate onto the table with only two of us!
Drew it up in CAD ready to cut:
Here's a time lapse video of the machine cutting it out!
All cleaned up ready to tack. Those are 5" 600 lb casters we're going to use on her!
Comment