Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > The Other Side of the Ranch (Firearms)
 
Thread Tools Display Modes
Old 07-10-2018, 01:15 PM   #1
Killer
Ten Point
 
Killer's Avatar
 
Join Date: Sep 2013
Location: Powderly, TX
Hunt In: God's green earth
Default Bolt Catch Broke

I have an AR-10 in 308 made by Anderson that the bolt catch is messed up. It won't lock open after the magazine is empty shooting or if you pull it back by hand when the magazine is empty.

My question is will any AR-15 bolt catch work on an AR-10?
Are they manufacture specific?
What is the best kind to get to replace what came on the gun?
I have tried 3 different magazines and it did the same thing on all three.
Is there anything else that would cause this?
Killer is offline   Reply With Quote Back To The Top
Old 07-10-2018, 06:01 PM   #2
Tony Pic
Pope & Young
 
Tony Pic's Avatar
 
Join Date: Feb 2013
Location: NYS and Texas
Hunt In: NYS, Kerrville, Mountain Home and Harper
Default

Did you build this rifle/lower?
Occasionally the ball detent is forgot to be put on front of the spring for the bolt catch to pivot on. So whlie it does push back it does not have enough umph to hold it open.
My most dreaded part whn assembling lowers.
Tony Pic is offline   Reply With Quote Back To The Top
Old 07-11-2018, 01:50 AM   #3
rosco11
Ten Point
 
Join Date: Aug 2015
Location: Spring
Hunt In: Rocksprings
Default

This one right here.. works awesome in mine

http://www.primaryarms.com/black-rai...atch-lr-11-308
rosco11 is offline   Reply With Quote Back To The Top
Old 07-11-2018, 08:02 AM   #4
DesertDug
Ten Point
 
DesertDug's Avatar
 
Join Date: Apr 2013
Location: Deer Park
Hunt In: far out west texas & SHNF & Lovelady
Default

Love the phase 5 volt release.
DesertDug is offline   Reply With Quote Back To The Top
Old 07-11-2018, 08:16 AM   #5
ahlongslide
Six Point
 
ahlongslide's Avatar
 
Join Date: Apr 2015
Location: NW of Houston
Hunt In: Anywhere I can.
Default

No, they’re not compatible with an AR-15. But almost any AR-10 bolt catch will work. I really like the Seekins Precision one. But make sure you upgrade the spring and detent too, as that’s probably where the problem actually is. I’ve had a bolt catch not work due to friction of the detent, so now I polish and lube the hole (TWSS)
ahlongslide is online now   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1999-2012, TexasBowhunter.com