Portable camera stand - TexasBowhunter.com Community Discussion Forums

QDM4fun · 03-21-2018, 06:04 PM

Last year I made some portable Camera stands out of PVC to allow for a portable set up in soybean fields. The stands worked, but being tall, they moved in the wind and gave me a lot of blank pics.

This year I made the Gen 2 model.

1 Old traffic cone
1 6v solar panel
1 adjustable cam mount

A local traffic safety products place sold me the cone cheap, as they can’t use them on jobs if they are damaged or the reflective tape isn’t good.

Everything else was parts I had laying around.

I think it is gonna work good, but for version G2.1 I think I will mount an electrical junction box to hold the battery. Right now the battery is sitting on the ground and the cone covers it. Mounting the battery will make it “grab and go”.

Sent from my iPhone using Tapatalk

das7777 · 03-22-2018, 07:48 AM

Nice!

texan16 · 03-22-2018, 02:43 PM

Nothin wrong with that, should work just fine !!

stxslayer · 04-05-2018, 10:48 PM

That works. You should be able to find it as well. Every year I loose a camera for a while until I remember where I put it.

Quackerbox · 04-07-2018, 08:03 AM

Cool

I made some screw in mounts like that last year . By far the best mount. Quick, easy and less than 5 bucks

Sent from my SM-G930V using Tapatalk

flywise · 04-07-2018, 08:10 AM

Very creative

bronco611 · 04-08-2018, 08:55 AM

why not just change out the eye bolt for a lag screw eye bolt and not worry about jail time?

03-21-2018, 06:04 PM	#1
QDM4fun Six Point Join Date: Jul 2013 Location: Mississippi Hunt In: Mississippi and Kansas	Portable camera stand Last year I made some portable Camera stands out of PVC to allow for a portable set up in soybean fields. The stands worked, but being tall, they moved in the wind and gave me a lot of blank pics. This year I made the Gen 2 model. 1 Old traffic cone 1 6v solar panel 1 adjustable cam mount A local traffic safety products place sold me the cone cheap, as they can’t use them on jobs if they are damaged or the reflective tape isn’t good. Everything else was parts I had laying around. I think it is gonna work good, but for version G2.1 I think I will mount an electrical junction box to hold the battery. Right now the battery is sitting on the ground and the cone covers it. Mounting the battery will make it “grab and go”. Sent from my iPhone using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-22-2018, 07:48 AM	#2
das7777 Ten Point Join Date: Jan 2010 Location: Columbus, Texas & Matagorda, Texas Hunt In: Texas	Nice!

03-22-2018, 02:43 PM	#3
texan16 Pope & Young Join Date: Dec 2009 Location: Fairfield Hunt In: Freestone/Schleicher Counties	Nothin wrong with that, should work just fine !!

04-05-2018, 10:48 PM	#4
stxslayer Six Point Join Date: Mar 2011 Location: La Vernia Hunt In: Pearsall and Comfort	That works. You should be able to find it as well. Every year I loose a camera for a while until I remember where I put it.

04-07-2018, 08:03 AM	#5
Quackerbox Pope & Young Join Date: Jul 2010 Location: Magnolia Hunt In: The woods	Cool I made some screw in mounts like that last year . By far the best mount. Quick, easy and less than 5 bucks Sent from my SM-G930V using Tapatalk

04-07-2018, 08:10 AM	#6
flywise Pope & Young Join Date: Oct 2006 Location: Kempner,Tx Hunt In: Blanco, Nacadoches,NewMexico,Colorado	Very creative

04-08-2018, 08:55 AM	#7
bronco611 Four Point Join Date: Nov 2012	why not just change out the eye bolt for a lag screw eye bolt and not worry about jail time?