I thought of this the other day while I was walking around in a daze, It took me about 15 minutes to make and will probably cost most of you next to nothing to build as you can scare up 3 or 4 inch pcv pipe just about anywhere. The pipe I used is actually measured at 6.5" o.d. and is way bigger than what is needed but it was a piece that I have been trying to get rid of for a long time! So with that having been said give this a try...I simply sawed 4 spikes 4 inches long into one end of a piece of pvc pipe with a sabre saw. Pipe size and length is up to you but I would suggest 3 or 4" diameter and ~24" long. (will be ~20" after trimming the spikes and stuck into the ground). Simply push into the ground where you need it to hold your arrows while shooting at your favorite target.
Announcement
Collapse
No announcement yet.
Arrow Holder Tube For Outdoor Range
Collapse
X
-
Arquero, I had looked at those same fittings in fact just before I happened to think of the spikes and since I am still trying to save up towards my first $$$Million, I opted to go the cheaper route. Your flange idea obviously will work indoors whereas the spikes will not. I have the same problem with the friends all saying " here, hold my arrows will ya" No more! LOL
Comment
Comment