Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > D-I-Y Projects
 
Thread Tools Display Modes
Old 03-18-2017, 09:09 PM   #1
Jason Fry
Eight Point
 
Jason Fry's Avatar
 
Join Date: Apr 2010
Location: Abilene, TX
Hunt In: a tall tree
Default Split guard rasp bowie

I would not say that I am good at slotted guards, but they are something that a knife maker needs to learn to do. Have not seen a WIP on one in here, so I will put one together for this knife. Farrier rasp Bowie, full flat grind, 3/8 slotted guard, a tapered tang, and Texas flag scales. 14 inches overall. Likely heat treat Tuesday. I'll try and shoot some pics of that. Likely take me several weeks to get through this one, as I have quite a few other projects on tap.




Sent from my iPhone using Tapatalk
Jason Fry is offline   Reply With Quote Back To The Top
Old 03-20-2017, 09:30 PM   #2
WildThings
Eight Point
 
Join Date: Jul 2014
Location: Mont Belvieu/Baytown
Hunt In: None at the moment
Default

In for the show!!
WildThings is offline   Reply With Quote Back To The Top
Old 03-20-2017, 10:53 PM   #3
MySRT8U
Pope & Young
 
MySRT8U's Avatar
 
Join Date: Feb 2013
Location: Schertz
Hunt In: Boerne and anywhere else I can find
Default

Looks great!


Sent from my iPhone using Tapatalk Pro
MySRT8U is offline   Reply With Quote Back To The Top
Old 03-20-2017, 11:00 PM   #4
Texas007
Eight Point
 
Texas007's Avatar
 
Join Date: Nov 2013
Location: Lake Jackson
Hunt In: Midway,
Default

Following
Texas007 is offline   Reply With Quote Back To The Top
Old 03-20-2017, 11:23 PM   #5
Trailerman3
Eight Point
 
Trailerman3's Avatar
 
Join Date: May 2014
Location: Gibtown
Hunt In: Mason,Gibtown,Rocksprings
Default

Looking good.
Trailerman3 is offline   Reply With Quote Back To The Top
Old 03-21-2017, 08:12 AM   #6
Bjankowski
Associate Sponsor
 
Bjankowski's Avatar
 
Join Date: Dec 2008
Location: Burleson and Possum Kingdom
Hunt In: Eastlast Co. Mostly
Default

Looking good Jason; I'm in the process of buying a mill that will come in handy for guards and other things. Looking for one that will do what I want and will fit in the shop, I don't have much room left.
There's a lot of things I could do if I have one, not to mention would speed up my process, I'm wanting to equip my shop with what I want, before I retire from the corporate world. Hopefully REAL soon.
Bjankowski is offline   Reply With Quote Back To The Top
Old 03-21-2017, 11:25 AM   #7
Jason Fry
Eight Point
 
Jason Fry's Avatar
 
Join Date: Apr 2010
Location: Abilene, TX
Hunt In: a tall tree
Default Split guard rasp bowie

Quote:
Originally Posted by Bjankowski View Post
Looking good Jason; I'm in the process of buying a mill that will come in handy for guards and other things. Looking for one that will do what I want and will fit in the shop, I don't have much room left.

There's a lot of things I could do if I have one, not to mention would speed up my process, I'm wanting to equip my shop with what I want, before I retire from the corporate world. Hopefully REAL soon.


Yeah, a mill is a great tool. I got mine about a year ago, barely scratched the surface of its potential. I bought a Rong Fu 31. What mill are you looking at?


Sent from my iPhone using Tapatalk
Jason Fry is offline   Reply With Quote Back To The Top
Old 03-21-2017, 01:21 PM   #8
Bjankowski
Associate Sponsor
 
Bjankowski's Avatar
 
Join Date: Dec 2008
Location: Burleson and Possum Kingdom
Hunt In: Eastlast Co. Mostly
Default

I'm leaning towards the WEISS VM-32L, but I'm still looking. I have to get something with 120v, I'm maxed out on power unless I put in a sub panel, and moving is part of my retirement plan so that could be a factor.
Bjankowski is offline   Reply With Quote Back To The Top
Old 03-21-2017, 04:07 PM   #9
Jason Fry
Eight Point
 
Jason Fry's Avatar
 
Join Date: Apr 2010
Location: Abilene, TX
Hunt In: a tall tree
Default

I heat treated the blade today and it came out good. Have in the tempering oven now. Should start making progress in the next few days.

Rasp knives are always an adventure. Sometimes they harden, sometimes they don't. I did three today, and two came out right.
Jason Fry is offline   Reply With Quote Back To The Top
Old 03-21-2017, 06:27 PM   #10
SamHarper
Associate Sponsor
 
SamHarper's Avatar
 
Join Date: Jan 2013
Location: Austin
Default

For a long time, I believed that almost all farrier rasps were made of 1095 or something similar, but after failing to get a few hard when others in the same batch got hard, I did some spark testing. I'm convinced now that they are not all 1095. I suspect some may be case hardened, too. I have the best luck with Bellotta.
SamHarper is offline   Reply With Quote Back To The Top
Old 03-21-2017, 07:21 PM   #11
Bjankowski
Associate Sponsor
 
Bjankowski's Avatar
 
Join Date: Dec 2008
Location: Burleson and Possum Kingdom
Hunt In: Eastlast Co. Mostly
Thumbs down

Quote:
Originally Posted by SamHarper View Post
For a long time, I believed that almost all farrier rasps were made of 1095 or something similar, but after failing to get a few hard when others in the same batch got hard, I did some spark testing. I'm convinced now that they are not all 1095. I suspect some may be case hardened, too. I have the best luck with Bellotta.
I had a forum member bring me a knife from a rasp he couldn't heat treat, turned out to be case hardened.
Bjankowski is offline   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:36 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1999-2012, TexasBowhunter.com