Hoping to get some advice from anyone with one of the arrow building programs for an arrow build I am going to start.
Shooting a Mathews halon 32-7 with 30.5 inch draw at 70 pounds. The shortest arrow I can use will be about 29” carbon to carbon. (Possibly 28.5” if I drop down to 30" draw, I can shoot both lengths comfortably)
I want to try to get to 20% FOC which I know will be tough at my draw length. Looking at going with black eagle x impacts or possibly gold tip kinetic pierce platinums unless anyone has a better suggestion. I like the idea of the micro diameter arrow.
Was looking at either the black eagle 42 grain outsert or the Valkyrie archery 56 grain stainless outsert system. And then either a 200 grain or 250 grain broadhead, whichever would be needed to try to get to 20%. Also likely going with a 4 fletch set up to help steer these heavy fixed blade heads. Would like a lighted knock since they will be used for hunting purposes but will sacrifice that for a standard nock if you think it will make a large enough difference.
TIA for any advice
Shooting a Mathews halon 32-7 with 30.5 inch draw at 70 pounds. The shortest arrow I can use will be about 29” carbon to carbon. (Possibly 28.5” if I drop down to 30" draw, I can shoot both lengths comfortably)
I want to try to get to 20% FOC which I know will be tough at my draw length. Looking at going with black eagle x impacts or possibly gold tip kinetic pierce platinums unless anyone has a better suggestion. I like the idea of the micro diameter arrow.
Was looking at either the black eagle 42 grain outsert or the Valkyrie archery 56 grain stainless outsert system. And then either a 200 grain or 250 grain broadhead, whichever would be needed to try to get to 20%. Also likely going with a 4 fletch set up to help steer these heavy fixed blade heads. Would like a lighted knock since they will be used for hunting purposes but will sacrifice that for a standard nock if you think it will make a large enough difference.
TIA for any advice
Comment