Announcement

Collapse
No announcement yet.

8x8 ground blind

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by skillit View Post
    Smart do you have pictures?

    I was going to build it at the lease and don't plan on moving it. I figured without a floor it should not be too heavy.

    thanks for the input so far
    Sure do....look in this thread

    Comment


      #17
      Smart are those all 2x4 or did you use 2x2. What size pywood did you use for the sides

      Comment


        #18
        The only 2x4s used in the framing was for the door to close on (center back) and then the entire floor.

        The floor was 3/4" plywood and the sides were 9/32 sheathing. We just used 15/32" sheathing on a buddies blind and it was still pretty manageable weight wise when separated.

        Comment


          #19
          Sounds dang big

          Comment


            #20
            My Dad and I built an 8x8 stand about 8 years ago. I do not have any pictures unfortunately. We built it about 10 ft off the ground. It was quite a bit of work. The wood was very costly.

            Comment

            Working...
            X