FYI - Kreg crown moulding jig - TexasBowhunter.com Community Discussion Forums

fox1 · 04-15-2017, 07:48 PM

My wife picked me up a Kreg jig for moulding. Set everything up and couldn't get the miters to come out right. The scale for the spring angle was off by at least 15 degrees.
Jig works ok but save yourself some grief and set the spring angle with an angle finder.

krisw · 04-16-2017, 09:49 PM

I wondered if it worked as advertised.

04-15-2017, 07:48 PM	#1
fox1 Ten Point Join Date: Jan 2010 Location: East Texan by birth but spending all my time in Okl. Hunt In: now accepting invitations	FYI - Kreg crown moulding jig My wife picked me up a Kreg jig for moulding. Set everything up and couldn't get the miters to come out right. The scale for the spring angle was off by at least 15 degrees. Jig works ok but save yourself some grief and set the spring angle with an angle finder.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-16-2017, 09:49 PM	#2
krisw Pope & Young Join Date: Sep 2009 Location: Hughes Springs, TX Hunt In: Cass County	I wondered if it worked as advertised.