Added a winch.

[LloydMcCoy]

Had an extra winch so I added a piece of 6" [ channel and tapped the mounting holes. Added a eye to secure the hook to. Then put a "forklift charger plug" don't know the real name, for easy removal from winch when not in use. Here is the part number from grainger If you want.
put more plugs on controller
also added wire and a plug on my truck and my jeep at the lease
Watcha think.

[boh347]

Looks great! They are very handy, I've got one laying around myself that I need to mount. My oldest and I had to push our mule and use a come along the other weekend because a rat chewed through something. Mounting that winch moved up a couple spaces on the to do list.

[LloydMcCoy]

Those plugs are pretty cheap and very handy

[dadogg]

Nice addition to the trailer. Funny thing about winches we never think of them till we need em.

[LloydMcCoy]

Got one on both trailers and four wheeler they are to cheap not to have several. Plenty strong enough for what I need

[Bowtechlady]

Nice addition to the trailer. Funny thing about winches we never think of them till we need em.

True true true!

[T-Bolt]

Looks good!

[LloydMcCoy]

My dad seen it and Is now putting one on one of his trailers

[texan16]

Great idea..

[Natural Ag10]

Looks good

[robert garcia]

nice

[LloydMcCoy]

Also added 6 extra tie downs

And a small tool box for c r a p I don't need but must carry around for years

[cvanbrunt]

Careful with the tool box and backing up. Had to jackknife mine to get it in a drive way and had my box mounted on the front like that. The angle of the drive way pushing the back of the trailer up and the angle of the turn was the perfect storm and broke the tail light out on my truck. I've moved mine onto the top of the rails and soon to take it off completely for a different style over one of the fenders.

[LloydMcCoy]

I checked the "jackknife" situation before I mounted it permanently. Had two sizes of boxes and that one didn't hit the truck. Oh by the way , that is a bed rail box not a cross the bed box it's only like 10 " wide

[slacker]

Looks good and I like the idea of the forklift plugs. I used trolling motor plugs on my winch and it got hot and melted a little. My winch is mounted on a receiver tube and slides in on top of tongue.