Just some of the recent ones.
Blades cut out and profiled.
Rough ground
Final grind, drilled, sanded and ready for heat treat.
A set of scales stabilized and epoxied to the liners.
Getting ready to attach the scales after the blade has been heat treated, tempered hand sanded to 600 grit and acid etched.
Drilling the scales.
Reaming the pin holes to .254 for a nice slip fix.
Ready to attach the scales.
Epoxied up and clamped to cure.
This one is finished.
The other Damascus blade.
Blades cut out and profiled.
Rough ground
Final grind, drilled, sanded and ready for heat treat.
A set of scales stabilized and epoxied to the liners.
Getting ready to attach the scales after the blade has been heat treated, tempered hand sanded to 600 grit and acid etched.
Drilling the scales.
Reaming the pin holes to .254 for a nice slip fix.
Ready to attach the scales.
Epoxied up and clamped to cure.
This one is finished.
The other Damascus blade.
Comment