Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > Around the Campfire
 
Thread Tools Display Modes
Old 04-15-2018, 08:11 AM   #1
Krk77486
Four Point
 
Join Date: Sep 2015
Location: Damon
Hunt In: Pearsall
Default Time for a new zero turn (need opinions)

Well after 12 years of running my John deere , the motor finally gave out. With the cost to replace the engine around 2-2500, and 0% interest on new mowers, i have decided to buy a new one. I am looking fo first hand experience you have hade with some of the majors. Here is what i am looking at in the order i like them.

1. Skag tiger cat II
2. Skag cheetah
3. Gravely pro turn 252
4. Gravely pro turn 152
5 exmark lazer e
6. Snapper pro 125
7. Kubota 7xx not sure the model right now.

Or any other comparable mower you have had good experience with. Not looking at JD due to their interest rates.

Thanks.
Krk77486 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:29 AM   #2
Bowtech38
Ten Point
 
Bowtech38's Avatar
 
Join Date: Dec 2013
Location: Belton
Default

Look at a hustler. Simplier design, cheaper price. All the brands have the same drivetrain pretty much. You around temple by chance?
Bowtech38 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:31 AM   #3
Krk77486
Four Point
 
Join Date: Sep 2015
Location: Damon
Hunt In: Pearsall
Default

No sir. Probably 3.5-4 hours south.
Krk77486 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:31 AM   #4
Diamond S
Ten Point
 
Diamond S's Avatar
 
Join Date: Oct 2006
Location: Caldwell, Texas
Default

Look at the Ferris line, we had a 54 inch and now have a 72 inch. They are really put together well and have a great ride. They also offer a upgrade to the seat that feels like the air ride seats in a tractor. I mow 18 acres around the house so I need a big heavy duty mower. Our entrance is 3 1/4 acres with around 70 trees, I can mow it at a normal pace in an hour and 10 minutes.
Diamond S is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:35 AM   #5
Krk77486
Four Point
 
Join Date: Sep 2015
Location: Damon
Hunt In: Pearsall
Default

Quote:
Originally Posted by Diamond S View Post
Look at the Ferris line, we had a 54 inch and now have a 72 inch. They are really put together well and have a great ride. They also offer a upgrade to the seat that feels like the air ride seats in a tractor. I mow 18 acres around the house so I need a big heavy duty mower. Our entrance is 3 1/4 acres with around 70 trees, I can mow it at a normal pace in an hour and 10 minutes.
I was going to look at those yesterday, but ran out of time. Maybe one day this week.
Krk77486 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:35 AM   #6
Antlers86
Associate Sponsor
 
Antlers86's Avatar
 
Join Date: Oct 2011
Location: Athens
Hunt In: Jack/Coleman/Henderson
Default

Scag is a great mower! Use one weekly at work and have had zero major issues. Think only problem was blade engage switch going bad and that's it.

I personally own a Kubota and really like it.
Antlers86 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:36 AM   #7
312InchMagnum
Ten Point
 
312InchMagnum's Avatar
 
Join Date: Sep 2007
Location: LaBelle, TX
Hunt In: Gillespie County
Default

Love my Ferris! Ride is amazing.


Sent from my iPhone using Tapatalk
312InchMagnum is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:37 AM   #8
Krk77486
Four Point
 
Join Date: Sep 2015
Location: Damon
Hunt In: Pearsall
Default

Quote:
Originally Posted by Antlers86 View Post
Scag is a great mower! Use one weekly at work and have had zero major issues. Think only problem was blade engage switch going bad and that's it.

I personally own a Kubota and really like it.
Do you know which skag model it is? I have always onted skag ever since i bought my jd.
Krk77486 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:38 AM   #9
Diamond S
Ten Point
 
Diamond S's Avatar
 
Join Date: Oct 2006
Location: Caldwell, Texas
Default

Quote:
Originally Posted by Krk77486 View Post
I was going to look at those yesterday, but ran out of time. Maybe one day this week.
It will be worth your time.
Diamond S is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:39 AM   #10
Mayhem
Pope & Young
 
Mayhem's Avatar
 
Join Date: Oct 2006
Location: porter, tx
Hunt In: crockett, county
Default

Donít overlook the hustlers.


Sent from my iPhone using Tapatalk
Mayhem is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:42 AM   #11
Antlers86
Associate Sponsor
 
Antlers86's Avatar
 
Join Date: Oct 2011
Location: Athens
Hunt In: Jack/Coleman/Henderson
Default

Quote:
Originally Posted by Krk77486 View Post
Do you know which skag model it is? I have always onted skag ever since i bought my jd.
Scag Turf Tiger 54"

You got lucky with your JD. When it comes to JD equipment the bigger the better. Their smaller equipment normally doesn't hold up. Cheap and they just slap their brand on it. When it comes to heavier equipment they are good.

Scag is well known for heavy duty commercial grade lawn equipment. Can't go wrong and well worth the price. If you just plan on mowing your place and nothing major Hustler is a good go to brand. We also have an ExMark 72" and it's pretty nice. Definitely tell a difference though between it and Scag. If budget wasn't an issue I would go Scag 100%!

Last edited by Antlers86; 04-15-2018 at 08:47 AM.
Antlers86 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:46 AM   #12
MQ32Shooter
Pope & Young
 
MQ32Shooter's Avatar
 
Join Date: Oct 2006
Location: Garland, Texas
Hunt In: Cisco, Texas
Default

I bought a new Zero last year and all I figured out from talking to dealers and experienced users was get a Kawasaki engine. I did and I’m happy.
MQ32Shooter is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:46 AM   #13
boh347
Pope & Young
 
boh347's Avatar
 
Join Date: Sep 2010
Location: Christoval, tx
Hunt In: coke county, tx Nolan county, tx
Default

Scag makes some good stuff. Have a scag freedom z and it’s held strong for the last 5 years.
boh347 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:54 AM   #14
Hix
Ten Point
 
Hix's Avatar
 
Join Date: Sep 2015
Location: North Longview
Hunt In: East Texas- Gregg Co., Cass & Marion Co.
Default

Ferris
Hix is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:55 AM   #15
Krk77486
Four Point
 
Join Date: Sep 2015
Location: Damon
Hunt In: Pearsall
Default

Quote:
Originally Posted by Antlers86 View Post
Scag Turf Tiger 54"

You got lucky with your JD. When it comes to JD equipment the bigger the better. Their smaller equipment normally doesn't hold up. Cheap and they just slap their brand on it. When it comes to heavier equipment they are good.

Scag is well known for heavy duty commercial grade lawn equipment. Can't go wrong and well worth the price. If you just plan on mowing your place and nothing major Hustler is a good go to brand. We also have an ExMark 72" and it's pretty nice. Definitely tell a difference though between it and Scag. If budget wasn't an issue I would go Scag 100%!
My jd is a commercial grade from the jd dealer. Not one of the home depot or lowes junk. It has been a great mower. I think all i have replaced until now are blades, belts and a pto clutch.
Krk77486 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:56 AM   #16
txarcher
Ten Point
 
txarcher's Avatar
 
Join Date: Sep 2008
Location: Muleshoe, Texas
Hunt In: Menard, Brown, and Lamb County
Default

My dad had a new motor put in his JD z series last summer for $600.00. It was a brand new motor and they did it at the jd house.


Sent from my iPhone using Tapatalk
txarcher is offline   Reply With Quote Back To The Top
Old 04-15-2018, 09:04 AM   #17
Electrican
Pope & Young
 
Electrican's Avatar
 
Join Date: Oct 2011
Location: Burleson TX
Hunt In: for a lease
Default

Quote:
Originally Posted by Mayhem View Post
Donít overlook the hustlers.


Sent from my iPhone using Tapatalk
||
Electrican is offline   Reply With Quote Back To The Top
Old 04-15-2018, 09:06 AM   #18
txwhitetail
Pope & Young
 
txwhitetail's Avatar
 
Join Date: Apr 2014
Location: San Angelo
Hunt In: Irion Co
Default

Hustler
txwhitetail is offline   Reply With Quote Back To The Top
Old 04-15-2018, 09:09 AM   #19
Gladesgator
Eight Point
 
Join Date: Jul 2010
Location: Cushing,TX
Hunt In: Rusk County, FL and AR
Default

Quote:
Originally Posted by Diamond S View Post
Look at the Ferris line, we had a 54 inch and now have a 72 inch. They are really put together well and have a great ride. They also offer a upgrade to the seat that feels like the air ride seats in a tractor. I mow 18 acres around the house so I need a big heavy duty mower. Our entrance is 3 1/4 acres with around 70 trees, I can mow it at a normal pace in an hour and 10 minutes.
X2
Have had one for 15 years, 10 of them in South FL where you mow year round.
It is still going strong.
Gladesgator is offline   Reply With Quote Back To The Top
Old 04-15-2018, 09:16 AM   #20
drwilliams
Eight Point
 
Join Date: Jan 2013
Location: Temple, Tx
Default

Go get you a hustler raptor sd. We own two of them and they have been great mowers. They are dang near half the price of scag and just as good. I have used both scag and hustler and will continue using hustler.

Sent from my SM-G950U using Tapatalk
drwilliams is offline   Reply With Quote Back To The Top
Old 04-15-2018, 09:22 AM   #21
popeandyoung151
Eight Point
 
popeandyoung151's Avatar
 
Join Date: Mar 2012
Location: Fort Worth
Hunt In: Vernon, TX
Default

Have you checked out Bad Boy? I’ve heard good things about them. I bought the MZ Magnum with the 54” deck. It’s been good so far. But I’ve only put 2 hours on it.
popeandyoung151 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 09:50 AM   #22
TTU TX Hunter
Ten Point
 
TTU TX Hunter's Avatar
 
Join Date: Sep 2011
Location: Sanger, TX
Hunt In: Archer County and Denton County
Default

The scag cheetah is the way to go in my opinion, it’s one of the fastest mowers in the market and is built right for commercial work and will hold up compared to some of the others mentioned.
TTU TX Hunter is offline   Reply With Quote Back To The Top
Old 04-15-2018, 10:17 AM   #23
MacDaddy67
Ten Point
 
MacDaddy67's Avatar
 
Join Date: Jun 2012
Location: Magnolia
Hunt In: Milano
Default

lets see///you got 12 years out of your JD...seems to me I would start there...

JD Z Trac 540 - with a full 4 year warranty...longest in the business

Cheaper than most you mentioned also
MacDaddy67 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 10:17 AM   #24
deerwatcher51
Ten Point
 
deerwatcher51's Avatar
 
Join Date: Jun 2016
Location: Brenham & Richland Springs
Hunt In: Richland Springs & Washington on the Brazos
Default

I have a JD commercial zero turn and love it.......you get what you pay for.
deerwatcher51 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 10:19 AM   #25
sideways
Ten Point
 
sideways's Avatar
 
Join Date: Nov 2009
Default

Scag


Sent from my iPhone using Tapatalk Pro
sideways is offline   Reply With Quote Back To The Top
Old 04-15-2018, 10:40 AM   #26
MisterSanders
Ten Point
 
MisterSanders's Avatar
 
Join Date: Jul 2014
Location: Chambers Co.
Hunt In: Chambers, Bandera, Batson, Sonora
Default

Just get a ferris and be done with it. I've got a scag, and it is a tank. Only issues Ive had are leveling the deck every year, and the engine mount bolts have to be replaced every year. My dad has a ferris and it rides like a Cadillac, guaranteed not to spill a drop of your beer while mowing. He owns a 15 acre rv park, mows every weekend, weather allowing, and has never had an issue.
MisterSanders is online now   Reply With Quote Back To The Top
Old 04-15-2018, 11:10 AM   #27
justindiehl7
Ten Point
 
justindiehl7's Avatar
 
Join Date: Oct 2011
Location: Conroe. TX
Hunt In: Woodville, TX
Default

I just picked up 2 more commercial contracts and Iím going to buy a 61Ē scag cheetah with a Kawasaki on it this week! Have three Kawasaki motors on other mowers and I love them!


Sent from my iPhone using Tapatalk
justindiehl7 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 11:18 AM   #28
MarkV
Pope & Young
 
MarkV's Avatar
 
Join Date: Sep 2007
Location: Franklin
Default

Scag is nice but price is high.

I will be in the market for a new one next year after we get the house built. Will most likely be getting a bad boy.
MarkV is offline   Reply With Quote Back To The Top
Old 04-15-2018, 11:25 AM   #29
elhefe
Ten Point
 
elhefe's Avatar
 
Join Date: Oct 2006
Location: Montgomery, Tx.
Default

Love my Hustler
elhefe is offline   Reply With Quote Back To The Top
Old 04-15-2018, 11:25 AM   #30
Sparzo
Ten Point
 
Sparzo's Avatar
 
Join Date: Nov 2007
Location: Houston
Default

Quote:
Originally Posted by txwhitetail View Post
Hustler


Hustler 60Ē +Kawasaki engine=fun to mow


Sent from my iPhone using Tapatalk
Sparzo is offline   Reply With Quote Back To The Top
Old 04-15-2018, 11:29 AM   #31
brownchristian
Ten Point
 
Join Date: Mar 2011
Location: Houston
Hunt In: Freer
Default

Ferris. Great ride. Own two. 72 and 48. Both great machines. If u decide on Ferris PM me and I will tell u where to buy for cheaper than u can find in Texas delivered to ur door.

I like Kubota also mainly for the easy swing up deck. Never driven one but have a friend that owns two diesel machines for commercial use.
brownchristian is offline   Reply With Quote Back To The Top
Old 04-15-2018, 11:38 AM   #32
6.5 shooter
Eight Point
 
6.5 shooter's Avatar
 
Join Date: Jan 2017
Default

I love my ferris IS2100Z
6.5 shooter is offline   Reply With Quote Back To The Top
Old 04-15-2018, 11:59 AM   #33
JonW
Six Point
 
JonW's Avatar
 
Join Date: Oct 2008
Location: Lickskillet, TX
Hunt In: Tennessee, Ohio, Texas
Default

I have two Gravely 60" Pro-turns and am very happy with both. I can't speak for the other brands personally. It's probably a matter of personal preference.


Sent from my iPhone using Tapatalk
JonW is online now   Reply With Quote Back To The Top
Old 04-15-2018, 12:07 PM   #34
eteranch
Four Point
 
Join Date: Mar 2012
Location: Royse City
Hunt In: Comanche County
Default

Been running our Exmark with a kawasaki motor for probably 10 years now. I have only had to replace one idler pulley on the deck and regular maintenance. I mow close to 2 acres with it. Been a good mower.
eteranch is offline   Reply With Quote Back To The Top
Old 04-15-2018, 01:02 PM   #35
8mpg
Ten Point
 
8mpg's Avatar
 
Join Date: Mar 2015
Location: Keller
Default

I have a Gravely Proturn 460 and love it.

That being said, you need to go test drive them. You will see the big differences in each machine. Ferris is really nice with a coil over suspension. My gravely has a suspension seat. My dad's Skag will shake you to death if you have a rough yard. If I were to buy again, it would be Ferris, Gravely or Hustler. Ferris for the full suspension. Gravely for great all around mower, hustler is a big cheaper than the rest for the same specs. I love Kubota and wanted their ZD diesel mower. Id check them out as well.

I would not buy Skag (great mower but price is a killer), Bad Boy I didnt like due to what felt like a mushy response with the hydraulics. JD I believe is made in China.
8mpg is offline   Reply With Quote Back To The Top
Old 04-15-2018, 01:16 PM   #36
pure lefty
Ten Point
 
Join Date: Aug 2009
Location: Huntsville, Texas
Hunt In: Leon County and wherever
Default

pm sent
pure lefty is offline   Reply With Quote Back To The Top
Old 04-15-2018, 01:44 PM   #37
Bmarsh9
Six Point
 
Bmarsh9's Avatar
 
Join Date: Nov 2010
Location: Rhome
Hunt In: Wise county
Default

I have a bad boy zt elite 60" and I love it, I think all of the zero turns are kind of similar these days. Probably can't go wrong with any of them.
Bmarsh9 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 02:06 PM   #38
HFDSwasta
Six Point
 
HFDSwasta's Avatar
 
Join Date: Jan 2010
Location: Montgomery tx
Default

Currently running a Scag TT2 with the vanguard efi 37hp. Have owned and put over 500 hours on gravely proturn and bobcat fastcat pro.

This is only my opinion but from mowers ive looked at and ridden the “you get what you pay for” stands out with the Scag TT2 and Gravely proturn 460. The bobcats if you have a dealer are a great mower for the price in my opinion way better than hustler or babdboy.
But when you step up to the bigs its noticeable. The Scag and gravely have an excellent ride, tight sticks ie:steering, and dont bog when mowing thick or wet grass.

Difference between gravely and scag is the scag TT2 has better hydro’s and a drive shaft vs. a belt that can and will loosen or slip when mowing. Both are excellent climbers on steep terrain and the new vanguard is a gas saver vs the kawasakis i have had in the past.

Go out look and test ride you will hear, see and feel the difference between the cheaper rides vs the higher end models.
HFDSwasta is offline   Reply With Quote Back To The Top
Old 04-15-2018, 04:48 PM   #39
Tye
Ten Point
 
Tye's Avatar
 
Join Date: Nov 2006
Location: Granbury,Tx and hunt Eastland Cty
Default

Bought s Hustler 54 SD on Saturday. We have a Hustler at the ranch as well. Payed $3750 OTD with ag exempt
Attached Images
 
Tye is offline   Reply With Quote Back To The Top
Old 04-15-2018, 05:19 PM   #40
Rtbean1140
Four Point
 
Rtbean1140's Avatar
 
Join Date: Mar 2016
Location: Beaumont
Hunt In: Beaumont, Boerne, Lubbock
Default

We have an Exmark and it has worked perfectly for our needs. The mower was submerged under water for a week during Hurricane Harvey and after draining the lines/changing out filters- she is running like a tank.
Rtbean1140 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 07:12 PM   #41
xman59
Pope & Young
 
Join Date: Mar 2009
Default

hustler,, great mowers sure like mine
xman59 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 07:39 PM   #42
doghouse
Pope & Young
 
doghouse's Avatar
 
Join Date: Jan 2008
Location: Goldthwaite
Hunt In: Mills County
Default

Have a new Bad Boy mower and love it. Your a good ways from Goldthwaite are I would have my Nephew contact you. He works for Hoffpauir Polaris in Goldthwaite. His name is Michael if your interested in traveling that far, tell him uncle Mark said to give him a call. They have a website.
doghouse is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:32 PM   #43
rebelbow
Ten Point
 
rebelbow's Avatar
 
Join Date: Dec 2006
Location: east texas
Hunt In: tx,ks,ok
Default

Quote:
Originally Posted by Sparzo View Post
Hustler 60Ē +Kawasaki engine=fun to mow


Sent from my iPhone using Tapatalk
rebelbow is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:33 PM   #44
GA Bowhunter
Spike
 
GA Bowhunter's Avatar
 
Join Date: Mar 2015
Location: Watkinsville, GA
Hunt In: Tree/blind/ground
Default

Quote:
Originally Posted by Krk77486 View Post
Well after 12 years of running my John deere , the motor finally gave out.
Quote:
Originally Posted by txarcher View Post
My dad had a new motor put in his JD z series last summer for $600.00. It was a brand new motor and they did it at the jd house.
I'd be getting one of these $600 jewels and keeping that 12 year old JD working.
GA Bowhunter is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:49 PM   #45
Krk77486
Four Point
 
Join Date: Sep 2015
Location: Damon
Hunt In: Pearsall
Default

Quote:
Originally Posted by txarcher View Post
My dad had a new motor put in his JD z series last summer for $600.00. It was a brand new motor and they did it at the jd house.


Sent from my iPhone using Tapatalk
You may want to go back and look at your dads reciept. New 23hp kawasaki online is about $1800 and not a direct replacement. New 25hp is about $1900. 26hp honda conversion kit is $2400 and needs a little fab work toget it on there. These prices are for MOTOR ONLY. Direct replacement kawasaki from john deere is over $3k plus labor. May be worth the drive to the dealer your dad used if your numbers are correct.
Krk77486 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:50 PM   #46
Krk77486
Four Point
 
Join Date: Sep 2015
Location: Damon
Hunt In: Pearsall
Default

Quote:
Originally Posted by GA Bowhunter View Post
I'd be getting one of these $600 jewels and keeping that 12 year old JD working.
I would love to repower and keep on using, but i dont want to shell out the 3k cash when i can borrow at 0%
Krk77486 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:54 PM   #47
GA Bowhunter
Spike
 
GA Bowhunter's Avatar
 
Join Date: Mar 2015
Location: Watkinsville, GA
Hunt In: Tree/blind/ground
Default

Quote:
Originally Posted by Krk77486 View Post
You may want to go back and look at your dads reciept. New 23hp kawasaki online is about $1800 and not a direct replacement. New 25hp is about $1900. 26hp honda conversion kit is $2400 and needs a little fab work toget it on there. These prices are for MOTOR ONLY. Direct replacement kawasaki from john deere is over $3k plus labor. May be worth the drive to the dealer your dad used if your numbers are correct.
For 3k I'd drop a small block Chevy in it.
GA Bowhunter is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:55 PM   #48
Krk77486
Four Point
 
Join Date: Sep 2015
Location: Damon
Hunt In: Pearsall
Default

Quote:
Originally Posted by GA Bowhunter View Post
For 3k I'd drop a small block Chevy in it.
Thats why im looking for a new mower.
Krk77486 is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:56 PM   #49
Kbar
Six Point
 
Kbar's Avatar
 
Join Date: Apr 2013
Default

Quote:
Originally Posted by Krk77486 View Post
I would love to repower and keep on using, but i dont want to shell out the 3k cash when i can borrow at 0%
I did a little google-fu based on the model you have.
If the shaft that runs the clutch is vertical (up and down) you can get out on the cheap (sometimes)
If the shaft runs front to back (horizontal) - might as well scrap it.
Then, there are a lot of other things that come into play in both scenarios above like muffler mounts and locations / wiring to the existing harness - even throttle and choke cable setups---------
Kbar is offline   Reply With Quote Back To The Top
Old 04-15-2018, 08:58 PM   #50
Krk77486
Four Point
 
Join Date: Sep 2015
Location: Damon
Hunt In: Pearsall
Default

Quote:
Originally Posted by Kbar View Post
I did a little google-fu based on the model you have.
If the shaft that runs the clutch is vertical (up and down) you can get out on the cheap (sometimes)
If the shaft runs front to back (horizontal) - might as well scrap it.
Then, there are a lot of other things that come into play in both scenarios above like muffler mounts and locations / wiring to the existing harness - even throttle and choke cable setups---------
Horrizontal shafts...
Krk77486 is offline   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:47 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1999-2012, TexasBowhunter.com