My goal was to build a one person loadable rack that I could call out of alone or up to 3 people. The plan was for a shooter and shiner to be in the rack at each set and the 3rd person remain in front seat. Third person could squeeze in front while traveling or ride in the rack.
Most of the square tubing was on hand, but did have to buy the expanded metal and seat . I expect to have less than $125 upon completion.
I will enclose the back with expanded metal and possibly have a couple doors to make access easy.
The only challenge so far is dealing with the Ranger bed being about an inch deeper in the back. This caused some measurement and level challenges to keep everyone thing level with the bed rails.
Should have some more progress tomorrow.
Most of the square tubing was on hand, but did have to buy the expanded metal and seat . I expect to have less than $125 upon completion.
I will enclose the back with expanded metal and possibly have a couple doors to make access easy.
The only challenge so far is dealing with the Ranger bed being about an inch deeper in the back. This caused some measurement and level challenges to keep everyone thing level with the bed rails.
Should have some more progress tomorrow.
Comment