Reply
Go Back   TexasBowhunter.com Community Discussion Forums > Topics > D-I-Y Projects
 
Thread Tools Display Modes
Old 10-03-2017, 11:02 AM   #1
tom125446
Six Point
 
tom125446's Avatar
 
Join Date: Apr 2015
Location: Houston, Texas
Hunt In: Liberty County
Question Fixing a Ground Blind

Harvey broke a number of the poles that support one of my ground blinds. What would you use to replace the broken poles with?

I have the specs of the parts as they sell them on the Barronett site for $9.99/piece: POLE FIBERGLASS 49.50 IN X 9.50 MM.

My hunting budget is limited, so I would rather just spend a few dollars to fix this one up.

For those interested in the model: Grounder 350.

It has a a tear as well, but I am going to use fabric repair tape sold to repair tents, so I am good there. I am just not sure what I am going end up using for the poles.
tom125446 is offline   Reply With Quote Back To The Top
Old 10-03-2017, 11:30 AM   #2
ballgame
Ten Point
 
ballgame's Avatar
 
Join Date: Jan 2012
Location: Houston
Hunt In: Hill Country
Default

just use some 1/2 PVC, cut to size and use zipties to secure.

I have done this on countless ground blinds with good results.

I actually run a piece of 1/2 along the top of all my blinds that are brand new.

This way I know they wont be caved in
ballgame is online now   Reply With Quote Back To The Top
Old 10-03-2017, 02:50 PM   #3
texan4ut
Ten Point
 
texan4ut's Avatar
 
Join Date: Jul 2014
Location: Round Rock, TX
Hunt In: Where I can, Terrell County
Default

I was thinking go to Academy and by cheap fiberglass replacement poles and cut 1.5 foot sections to attached where the break is. Use gorilla duct tape as it is strong and black in color.
texan4ut is offline   Reply With Quote Back To The Top
Old 10-03-2017, 02:59 PM   #4
stroker_ace
Nubbin' Buck
 
Join Date: Aug 2011
Location: Kaufman, TX
Hunt In: Hamilton & Kaufman Counties
Default

I have used the fiberglass/plastic rods that are used for electric fences. You can find them at Tractor Supply.
stroker_ace is offline   Reply With Quote Back To The Top
Old 10-07-2017, 11:00 AM   #5
sticks
Six Point
 
sticks's Avatar
 
Join Date: Aug 2010
Location: midlothian, tx
Hunt In: brownwood/may tx
Default

3/8" rebar is really cheap.
sticks is offline   Reply With Quote Back To The Top
Old 10-07-2017, 11:31 AM   #6
talltexasshoote
Pope & Young
 
talltexasshoote's Avatar
 
Join Date: Sep 2008
Location: Lubbock
Hunt In: Kent and garza counties
Default

Quote:
Originally Posted by stroker_ace View Post
I have used the fiberglass/plastic rods that are used for electric fences. You can find them at Tractor Supply.
This. They work great
talltexasshoote is offline   Reply With Quote Back To The Top
Old 10-09-2017, 09:55 AM   #7
smokeless
Ten Point
 
Join Date: Aug 2009
Location: Rockdale
Hunt In: Llano
Default

Yep, the electric fence post from TSC, work great. I have fixed a couple with them. Don't cost much, easy to work with.
smokeless is online now   Reply With Quote Back To The Top
Old 10-09-2017, 10:30 AM   #8
oktx
Pope & Young
 
oktx's Avatar
 
Join Date: Dec 2006
Location: Wise County
Hunt In: Wise County
Default

How long do you need? I have some extras.
oktx is online now   Reply With Quote Back To The Top
Old 10-11-2017, 03:59 PM   #9
tom125446
Six Point
 
tom125446's Avatar
 
Join Date: Apr 2015
Location: Houston, Texas
Hunt In: Liberty County
Default

Quote:
Originally Posted by oktx View Post
How long do you need? I have some extras.
Very generous of you to offer. I am pretty far away from you though. I think I found my answer.

I am going to go by Lowe's and see if the 3/8" by 4ft. rebar will work as replacement poles.

The only question I have is will I be able to cut off the ends of the broken poles, drill into the connector pieces (that somewhat resemble small pvc connectors) that are used to connect to the hub, and fit the rebar in where I drilled, using superglue to ensure they stay in there.

Last edited by tom125446; 10-11-2017 at 04:01 PM.. Reason: Can't type so good
tom125446 is offline   Reply With Quote Back To The Top
Old 10-11-2017, 04:00 PM   #10
tom125446
Six Point
 
tom125446's Avatar
 
Join Date: Apr 2015
Location: Houston, Texas
Hunt In: Liberty County
Default



The end has the connector piece that secures into the hub.
tom125446 is offline   Reply With Quote Back To The Top
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:39 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 1999-2012, TexasBowhunter.com