I guess I didn’t have the jack up far enough on this 6x10 and it took a beating. Any ideas on what to do here? I’d like to get it back to original like condition considering it is my buddies trailer. I took the jack off and the mount that is welded as the tongue is all bent up so I can’t just install a new jack without fixing that part first.
Announcement
Collapse
No announcement yet.
Bent up the trailer jack
Collapse
X
-
Bent up the trailer jack
I bent, broke, mangled about 1/2 dozen trailer jacks. Dad got tired of them not working , and having to replace them every year, and put one of these on it.
When it's all the way up, the foot plate is flush against the bottom of the frame rails. You just have to crank it down several turns to expose the pin to drop the foot down to the ground, and crank from there. Plenty stout to unhook the trailer with the tractor or 4 runner on it, and impossible to tear off...I've tried.
Those fold up ones are dangerous POS's.Last edited by Dale Moser; 04-30-2018, 01:46 PM.
Comment
Comment