Im sure something like this has been put up before but i thought i would share. i built two of these a few years ago and i had put a couple new bags on today. I started off with bending 1/2" conduit just a little wider than the bag. Use four 1/4" U bolts to hold the pipe together and to hold the bag. Then i used an old tie down to keep the legs from spreading out too wide. Its way cheaper this way than buying one and better than just sitting your bag on the ground. by the way the academy bags are the same as the others that cost about ten bucks more and they work great.
Announcement
Collapse
No announcement yet.
Target hanger.
Collapse
X
Comment